Rear gas tank install question
 

I have been all over the sight and internet looking for an answer i put the LMC rear mount gas tank in .I have the filler neck installed through the bed .The sending unit had the gas line that goes to the engine .It also had a second fitting on the topside of the tank that i guess could be used as a return line for fuel injected .Mine is carb so do i plug this fitting or can it be used as a vent?Thanks Oz You can see it next to the frame rail upside down of course!Buying a camera as soon as i can afford one the truck is killing me in parts !

Re: Rear gas tank install question
 

you can use it as a vent

Re: Rear gas tank install question
 

Cool thought i could what do you do run it up high and what can you use on the end?Some sort of vent?I ran it up the frame rail for now just concerned about fuel vapors .Thanks for the response.

Re: Rear gas tank install question
 

Here is an example of the roll over safety vent valve, there are several different sizes.
http://www.ebay.com/itm/3-8-NPT-Pipe...-/221802346305

Re: Rear gas tank install question
 

nothing to worry about just run it down the frame a few feet

Re: Rear gas tank install question
 

One is for a drain return and the other is yes for the vent. You can run the 3/8 tube all the way up to your canister in the passenger fender if you have one. you can also get a vented gas cap and leave the hole in the tank plugged.

Re: Rear gas tank install question
 

Thanks everyone i am putting a boat style vent up high and calling it done .The design of the gas fill is non vented .Im curious how well i will be able to fill it.

Re: Rear gas tank install question
 

if youre putting it in the bed floor right over the tank , it will back fill fast. I put my marine style filler in the driver rear stake pocket. Works good.