The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 1 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - WA 4x4 3/4T Hubcap Conversion Service- (https://67-72chevytrucks.com/vboard/showthread.php?t=679245)

PICKMUP

08-12-2015 07:01 PM

4x4 3/4T Hubcap Conversion Service-

2 Attachment(s)

I will cut & shape & finish the centers of your 2WD 3/4T hubcaps and make them into correct 4x4 caps. 4x4 caps are expensive/2WD caps are cheap!
Send me your caps and I will convert them and return them to you for:
$150 pr

These are done with hydraulic dye cutters and special made shaping molds...to guarantee the correct uniform round shape & roll...not with a saw & a hammer!

Here is a set I just finished for Mike Cofield, on his caps.

chewychevy67

08-12-2015 08:23 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Can you do this on 67 68 caps?

special-K

08-13-2015 07:16 AM

Re: 4x4 3/4T Hubcap Conversion Service-

Frank, I'm glad to hear you have opened up to doing "our" caps sent to you. This is a great service to have available. You'll be hearing from me in the future

sambrutay

08-13-2015 07:36 AM

Re: 4x4 3/4T Hubcap Conversion Service-

Looks great!

PICKMUP

03-20-2016 05:21 PM

Re: 4x4 3/4T Hubcap Conversion Service-

ttt

DeadheadNM

03-20-2016 05:59 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Frank can you do this to SS, chrome or both? Cost include return shipping? Thanks, Pete

PICKMUP

03-21-2016 12:06 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Quote:

Originally Posted by DeadheadNM (Post 7529253)

Frank can you do this to SS, chrome or both? Cost include return shipping? Thanks, Pete

Stainless...they come out perfect! The chrome over tin/brass splits & cracks and the chrome peals off. That does include return shipping (in your box), so send them in a good box. Thanks, Frank

Undone

03-21-2016 07:57 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Quote:

Originally Posted by PICKMUP (Post 7530170)

Stainless...they come out perfect! The chrome over tin/brass splits & cracks and the chrome peals off. That does include return shipping (in your box), so send them in a good box. Thanks, Frank

Those look Great.

Cali72K20

03-22-2016 02:52 PM

Re: 4x4 3/4T Hubcap Conversion Service-

PM sent, thanks!

casey

52napco

03-31-2016 07:15 AM

Re: 4x4 3/4T Hubcap Conversion Service-

Frank do you have any 3/4 4x4 caps for sale ??? The last set i bought from you looked great
thanks

PICKMUP

03-31-2016 01:54 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Quote:

Originally Posted by 52napco (Post 7542532)

Frank do you have any 3/4 4x4 caps for sale ??? The last set i bought from you looked great
thanks

Grade #1---Like NEW (the best I ever get):
Two front 4x4 caps = $300 + $25 S/H/INS
Full set 4x4 caps = $500 + $25 S/H/INS

Grade #2 ( a few little dings & things-no dents or splits)
Two front 4x4 caps = $250 + $25 S/H/INS
Full set of 4x4 caps = $400+ $25 S/H/INS

Eagle9502

03-31-2016 08:52 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Frank, any luck on GMC 3/4 ton caps?

PICKMUP

04-25-2016 05:14 PM

Re: 4x4 3/4T Hubcap Conversion Service-

1 Attachment(s)

Quote:

Originally Posted by Eagle9502 (Post 7543289)

Frank, any luck on GMC 3/4 ton caps?

I have a set all prepped and will finish the polishing by the end of the week. These will be polished more than normally, because there were scratches that I had to remove. They are stainless, and the centers are shaped out like the 69-72, to clear the deep rear hubs. They will look more like the original chrome caps, because of the extra polishing. All the paint was removed...and you know I do not repaint. I just do the metal work.
$400 + $25 S/H/INS

If Eagle9502 passes, they will be open to all.
Thanks, Frank

Cali72K20

04-25-2016 06:37 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Thank you Frank, the caps are perfect!!!

cjmorr13

04-25-2016 09:47 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Frank, perfect timing! Sent PM for a set. Thanks!

Eagle9502

04-25-2016 10:38 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Frank, sent you a PM with a question. I'll take them pending answer.

duallyjams

04-28-2016 09:27 AM

Re: 4x4 3/4T Hubcap Conversion Service-

What are the years that you can do ?

PICKMUP

04-28-2016 11:20 AM

Re: 4x4 3/4T Hubcap Conversion Service-

Quote:

Originally Posted by duallyjams (Post 7575843)

What are the years that you can do ?

Only those in pics above...69-75

PICKMUP

08-18-2016 04:32 PM

Re: 4x4 3/4T Hubcap Conversion Service-

4 Attachment(s)

Pics for 72Cheyene454:
Your 3/4T caps are done.
Here are the 1/2 T GMC caps you asked about.
Thanks, Frank

special-K

08-18-2016 11:28 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Hey Frankmup, refresh my memory. Do you restore dinged stainless caps? I have some such candidates.

72Cheyenne454

08-19-2016 10:41 AM

Re: 4x4 3/4T Hubcap Conversion Service-

5 Attachment(s)

Thank you Frank, my caps look great!

Sending you a PM. Here's some pics for you...

Miles

Quote:

Originally Posted by PICKMUP (Post 7687246)

Pics for 72Cheyene454:
Your 3/4T caps are done.
Here are the 1/2 T GMC caps you asked about.
Thanks, Frank

PICKMUP

08-19-2016 04:59 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Quote:

Originally Posted by special-K (Post 7687642)

Hey Frankmup, refresh my memory. Do you restore dinged stainless caps? I have some such candidates.

No. Sorry, I only do these 3/4T 4x4 "stainless" front cap conversions.

jondancer

11-02-2016 10:01 PM

Re: 4x4 3/4T Hubcap Conversion Service-

So the price is to punch the center out of the front two hubcaps ? I need gmc caps but would Chevy caps work and look the same after the center is punched out?
Thanks

PICKMUP

11-03-2016 11:36 AM

Re: 4x4 3/4T Hubcap Conversion Service-

Quote:

Originally Posted by jondancer (Post 7759162)

So the price is to punch the center out of the front two hubcaps ? I need gmc caps but would Chevy caps work and look the same after the center is punched out?
Thanks

Yes, Chevy & GMC caps look the same after cutting & shaping. Try to send matching pairs. Just look at them closely. There are two slightly different stampings, but of course you can't tell when they are on different sides of the truck.

rgreathouse

11-03-2016 11:57 PM

Re: 4x4 3/4T Hubcap Conversion Service-

Any more 3/4 4x4 complete Chevy sets available. Grade 1 or close?

All times are GMT -4. The time now is 01:29 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page