The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Need help with patch panel (https://67-72chevytrucks.com/vboard/showthread.php?t=679691)

11SECSS 08-17-2015 09:16 PM

Need help with patch panel
 
1 Attachment(s)
I'm needing a drivers side rear lower patch panel for my 71 shortbed .I"ve searched and can find longbed ones all day long but not for the short bed. Any help would be helpful as would part numbers need to get new wheel wells at the same time already got a new bed floor. This section was repaired once before not sure when but looks very old due to the paint jobs.

hugger6933 08-18-2015 07:48 AM

Re: Need help with patch panel
 
Did you look at Top Banana?

11SECSS 08-18-2015 08:43 PM

Re: Need help with patch panel
 
I'm wondering if I can just use a longbed one since I only need like 6-8" of metal.

Phildeez 08-18-2015 11:32 PM

Re: Need help with patch panel
 
Check these out. Might be what you need.


http://www.brotherstrucks.com/prodin...number=RLB72L0

Phildeez 08-18-2015 11:32 PM

Re: Need help with patch panel
 
Here's another.

http://www.brotherstrucks.com/prodin...number=RLB9S00

Phildeez 08-18-2015 11:36 PM

Re: Need help with patch panel
 
And here's your wheel wells.

http://www.brotherstrucks.com/prodin...number=IWT5572


All times are GMT -4. The time now is 07:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com