250ci I6 and 3spd Manual Transmission / Heater parts
 

LOCAL PICKUP ONLY $200

Getting ready to pull the I6 and transmission from my 68 LWB C10. It is the original engine from when I bought the truck and runs fantastic. I have just recently done new intake and exhaust gaskets as well as a new to me exhaust manifold. While that was all off, I had the carb rebuilt as well.

The last time the engine was running was about 2 weeks ago. I will be doing an LSx swap and Vintage Air install, so if you see anything engine / heater related that you need, let me know.

Everything comes as a package, soup to nuts, oil pan to air cleaner.

If you have any questions, please feel free to ask.

http://i1318.photobucket.com/albums/...pshn7xthvb.jpg

http://i1318.photobucket.com/albums/...psqmv4msvk.jpg

http://i1318.photobucket.com/albums/...psu2moi8ww.jpg

Thank you for looking

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Sold locally. Hopefully to a new board member.

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

anything left of the heater setup. im interested in the heater core

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

The heater core itself was junk. There was evidence of it leaking when I pulled it out.

I have the housing, fan and interior parts still left, along with the non-ac controls if anyone needs it.

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

If it's not broken or cracked, How much for the heater box? Shipped to 28677? Thanks...:metal:

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Let me get it out and clean it up. I will take some pictures of anything that looks suspect to me and post them, then we can discuss price.

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Heater Pictures:

http://i1318.photobucket.com/albums/...psgsrddtfy.jpg

http://i1318.photobucket.com/albums/...psuznkwgnr.jpg

http://i1318.photobucket.com/albums/...psp6mr1afk.jpg

http://i1318.photobucket.com/albums/...psc5carlrg.jpg

http://i1318.photobucket.com/albums/...pszdqmzfdr.jpg

http://i1318.photobucket.com/albums/...ps3di0pjvj.jpg

This is the only bad place that I found. Little rusted out portion here:

http://i1318.photobucket.com/albums/...psb67pxrap.jpg

All of the baffle doors work and so does the fan. It was working in my truck before I removed it.

Shipping on it is $22.06

How about $25 plus shipping?

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

I think I can take parts from mine and parts from yours and get a good one out of it. That price sounds fair. Send me a message and we'll figure out payment arrangements. Thanks!:metal:

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

PM sent

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Any chance you have the 3 speed shifter linkage? I'm looking for one to fit my 64 with a 68 saginaw. Last part I need to get it back on the road.
Thanks

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Let me look in a few boxes that I have. I put an aftermarket floor shifter on it when I was driving it, but I may have saved the original linkage. I am guessing that you are looking for the rods that went from the steering column to the transmission right?

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Yep, your exactly right. Ideally the rods and the tranny ears but I'll take what I can find. I replaced the original 3 speed with a Saginaw 3 speed from a 68 firebird so I could have the synco but now I need linkage to connect it. With all of the floor shifter conversions you would think these would be everywhere but I have had a heck of a time locating them. Let me know if you find them and I'll say a few prayers that for your search. :) Thanks

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

I have looked through the boxes that I have... no such luck. Sorry man.

Re: 250ci I6 and 3spd Manual Transmission / Heater parts
 

Motor and Transmission are sold...

Engine compartment heater box is sold...

All that is left is the under the dash portion of the heater/defroster and the non-ac controls if anyone is interested.