The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   LS 3 amd 4L60E controller (https://67-72chevytrucks.com/vboard/showthread.php?t=682634)

solidaxel 09-18-2015 09:07 AM

LS 3 amd 4L60E controller
 
I know the LS3 has its own ECM but what about the trans controller?

Where does the trans get its info, (TPS-VSS) what controller is available, and is there one better than the other ($$)
How does the cruise control work with this combo?

Matt Cramer 09-18-2015 09:28 AM

Re: LS 3 amd 4L60E controller
 
You might be able to use a PCM from something that had a 58X crank triggered motor backed by a 4L60E. Maybe a 2005-2006 GTO?

Another option would be to use a standalone transmission control box. I'm running a MicroSquirt on my 4L60E with a home-brew harness (disclaimer: I also work for a company that sells them).

solidaxel 09-18-2015 10:44 PM

Re: LS 3 amd 4L60E controller
 
I have a 4L60E in my 53 and a stand alone TCM BUT I have a Throttle Position Sensor on my Holley.
So how does the stand alone ECM connect to stand alone TCM for a TPS

Advanced Design 09-18-2015 10:51 PM

Re: LS 3 amd 4L60E controller
 
1 Attachment(s)
Don't know that stand alone systems will communicate with each other unless they were designed to. To get TPS input for both systems this should work.

http://www.tciauto.com/tc/electronic...-y-harnesshtml


All times are GMT -4. The time now is 09:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com