Will a 1989 241c transfercase work on a 4l80 out of a 1997 chevy
 

Hey guys I have a 76 k10 Its got lq9 with a modern 4l80
with a driver side 241c out of a 97 chevy. I was originally going to swap the front
axle over to the driver side but I just got a killer deal
on a passenger drop 241c out of an 89 blazer..So my question
is will the modern 4l80 work with the older 241c ..Will
it bolt rite up..Thanks in advance for you replies

Re: Will a 1989 241c transfercase work on a 4l80 out of a 1997 chevy
 

I'm looking at the 4L80E/NP241 xfer case adapters on ebay, I don't see any mention of different versions for passenger/driver side drop. Are the spline counts the same?

Re: Will a 1989 241c transfercase work on a 4l80 out of a 1997 chevy
 

Yes they are both 32 spline

Re: Will a 1989 241c transfercase work on a 4l80 out of a 1997 chevy
 

As far as I know, the adapters are to match bolt patterns up and correct input shaft depth. I'd think the one you have should work.