The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Tools, Shops and Shop Safety (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=89)

- - Great New Tool- Greenlee Tap (https://67-72chevytrucks.com/vboard/showthread.php?t=683500)

truckster

09-26-2015 10:52 PM

Great New Tool- Greenlee Tap

1 Attachment(s)

I just received a new tool I ordered from Amazon and used it today on some 1/2 inch aluminum. It's called the D-TAP; it's a combination tap and drill made by Greenlee and it's slick as snot. I chucked it up in my 3/8 DeWalt cordless and ran it through four holes. It drills the right size holes and taps them all in one neat operation.

OhioChevy

10-01-2015 12:51 AM

Re: Great New Tool- Greenlee Tap

Sweet bit. Do they make and sell them in 12-32 which is a fine thread tap?

drfloyd

10-01-2015 09:37 PM

Re: Great New Tool- Greenlee Tap

Looks like you can get them in all sizes up to 3/8". Fine thread included. Sets as well.

A1971Blazer

10-02-2015 02:15 PM

Re: Great New Tool- Greenlee Tap

I use these all the time in my machine shop......we call the draps (drill/taps)
they really save a lot of tool change time

All times are GMT -4. The time now is 09:40 PM.