I need a set of gears!
 

I am looking for a set (front and rear) of gears for my 12 bolt rear end. I believe it is a 8.875 diameter. Would like 4:10's but anything would be better than the 307's in there no. Thanks and let me know.

Eric

I have a set of 373 I would let go for 30 bucks

gears
 

Is that for both front and rear?

I need the ring and pinion, just so you know.

Have you got a 4 point carrier? I could be wrong but I think you neer to change your carrier also going from 3.07 to 3.73. We don't do 4x4's so i could be wrong.

That is a good question. How do I identify a four point carrier?

mother trucker's is right your 307 gears have a 3 series carier and the 373 that i have use a 4 series carier. the difference is were the ring gear is located to the pinion the lower the gear the closer to the pinion you need to be how close are you to PA ???? I,m pritty close to OH let me know maybe I could help.

I am about 40 mins straight south of Cedar Point. Do you have a carrier? Or does anyone else have a carrier. I broke a tooth on my ring gear and figured since I have to change it anyways I might as well change to something I will like better. Let me know. Even if you dont have a carrier, what exactly do you have as far as the 373? I am interested though.


E

I have every thing for the 373 front&rear carrier and gears 60 bucks for every thing or I have some 307 gears to get you back on the road

Is there a difference in gears for posi and non posi ? I have front and posi rear dana 44 out of a 75 4x4 .

Thick and thin
 

It's been a while since i've set one up although i believe either thick or thin gears are used with the appropriate series carrier.
motoretro

6772King,

I want those gears and carriers, PM me and let me know how you want your money and we can arrange shipping/pickup?

Thanks,

Eric

ttt