The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Application question on inner fenders (https://67-72chevytrucks.com/vboard/showthread.php?t=684477)

Clatterville trolley 10-05-2015 08:28 PM
Application question on inner fenders
 
I have a pair of inner fenders from a 67-72 Fleetside bed with a wooden floor and need to know if they are the very same ones used on a 67-72 Fleetside bed with a steel floor.
Will appreciate any info I can get to answer question or send me in the correct direction to solve the question.
Thanks in advance! Jay

LockDoc 10-05-2015 10:27 PM
Re: Application question on inner fenders
 
Quote:
Originally Posted by Clatterville trolley (Post 7331394)
I have a pair of inner fenders from a 67-72 Fleetside bed with a wooden floor and need to know if they are the very same ones used on a 67-72 Fleetside bed with a steel floor.
Will appreciate any info I can get to answer question or send me in the correct direction to solve the question.
Thanks in advance! Jay

I think all the fleetsides are the same but I've never really checked them out. I can check on the morning if you don't get a definite answer before then.... I have both.

LockDoc

68panelman 10-05-2015 10:33 PM
Re: Application question on inner fenders
 
I would think they are the same, just can't see GM changing inner fender press stamp dies for wood vs steel. End panels and cross sills are a diff cookie.

Clatterville trolley 10-07-2015 09:12 PM
Re: Application question on inner fenders
 
Quote:
Originally Posted by Clatterville trolley (Post 7331394)
I have a pair of inner fenders from a 67-72 Fleetside bed with a wooden floor and need to know if they are the very same ones used on a 67-72 Fleetside bed with a steel floor.
Will appreciate any info I can get to answer question or send me in the correct direction to solve the question.
Thanks in advance! Jay
Bump this up - still looking for confirmation one way or the other. Thanks! Jay

hugger6933 10-07-2015 09:15 PM
Re: Application question on inner fenders
 
they are the same either way. Jim

Clatterville trolley 10-07-2015 09:27 PM
Re: Application question on inner fenders
 
Quote:
Originally Posted by hugger6933 (Post 7333682)
they are the same either way. Jim

Thanks Jim! I felt sure someone would know the answer was. Jay


All times are GMT -4. The time now is 02:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com