The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - where can i get This glove box part?? (https://67-72chevytrucks.com/vboard/showthread.php?t=685402)

sharkskinman

10-15-2015 09:59 AM

where can i get This glove box part??

1 Attachment(s)

As well as a good insert?

SS317

10-15-2015 10:12 AM

Re: where can i get This glove box part??

I was just looking on LMC's website and saw those.
www.lmctruck.com

hope that helps.

tigerburns

10-15-2015 11:01 AM

Re: where can i get This glove box part??

I think LMC sells everything except what you are wanting. I just went through this with mine. I don't think anybody sells it. The bushings from LMC are only the plastic "doughnuts" that inset into the holes in the dash. You have to have a nut welded into the side of the glovebox door to screw into. I ended up buying a glovebox door off of a parts truck listed on the parts forum. You could weld your own nut on the glovebox I suppose.

Good luck

NevEno

10-15-2015 12:28 PM

Re: where can i get This glove box part??

the plastic bushing LMC sells isn't the same as original

sharkskinman

10-15-2015 01:03 PM

Re: where can i get This glove box part??

Looks like they are not beveled as needed..

ACK	10-15-2015 01:37 PM

Re: where can i get This glove box part??

Several years ago when I couldn't find one, I ended up improvising. I had an old fashion roll up window shade with plastic ends sitting around and it was the perfect diameter. Just had to drill the hole to size for the bolt and it's been in regular use for 3+ years with no problems.

65chevysub

10-15-2015 02:53 PM

Re: where can i get This glove box part??

Quote:

Originally Posted by ACK (Post 7342283)

Any pictures of your "improvisation"?

65chevysub

10-15-2015 02:55 PM

Re: where can i get This glove box part??

The old 4-5-6 Chevy Trucks in Kansas used to have them. Not sure if they are still around.

ACK	10-15-2015 04:39 PM

Re: where can i get This glove box part??

Quote:

Originally Posted by 65chevysub (Post 7342331)

Any pictures of your "improvisation"?

I'll unfasten it and post a photo if I get a chance. Unfortunately, I have more work than time –*sure many of you can relate.

65chevysub

10-16-2015 07:13 AM

Re: where can i get This glove box part??

Time? What is that? I know I dont have enough of it, lol

donthekawguy

10-16-2015 09:33 AM

Re: where can i get This glove box part??

Your also missing the bracket that goes on the door.

Chevy Fleetside

10-16-2015 09:55 AM

Re: where can i get This glove box part??

Back a few years ago I used to snag those from trucks in the bone yards. I think I bought some aftermarket ones and they were junk so I started taking them. Where they are today? Around somewhere. hahaha

All times are GMT -4. The time now is 06:18 AM.