The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   frame swap (https://67-72chevytrucks.com/vboard/showthread.php?t=685537)

6768chevylover 10-16-2015 04:01 PM

frame swap
 
I own a 67 2wd short bed pickup and am looking into buying a 71 blazer 4wd. I was planning on just restoring the blazer but then started thinking, could i swap the the truck to 4wd and the blazer to 2wd? im sure i know the answer just wanted to pick some brains. thanks

Hutch 10-16-2015 04:36 PM

Re: frame swap
 
6768chevylove
One Small Issue is:
The frame length and coil spring Suspension versus Leaf Spring's
Short bed frame= 115"
Blazer Frame = 105'

CarterD2015 10-16-2015 04:40 PM

Re: frame swap
 
Instead of swapping the frames could you change out the front crossmember and rear suspension? That way the vin (partial I think) stamped into the frame would remain with the correct vehicle.

Hutch 10-16-2015 11:33 PM

Re: frame swap
 
Anything can be done if you know how to fabricate
Welding spring perch's and shock mounts etc.
It is not a direct swap from a blazer to a truck


I once had a chance to take measurement's on a 4x4 short frame and a 2 wheel short frame

Both were bare frames and side by side

The 4x4 front is similar to the 2 wheel front
However
The back of the 4x4 is totally different from the 2 wheeler


All times are GMT -4. The time now is 06:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com