The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 1969 C/10 zerk fittings (https://67-72chevytrucks.com/vboard/showthread.php?t=686804)

bvb69C10

10-28-2015 05:54 PM

1969 C/10 zerk fittings

Can somebody tell me how many zerk grease fittings there are on my 69 c10 front end? I don't see any on the back of the truck so I guess the only lubrication fittings are on the front? Any help would be appreciated...thanks.

Kennuck

10-28-2015 05:57 PM

Re: 1969 C/10 zerk fittings

Near as I can recall 12 on the front end. Don't forget the driveshaft.

bvb69C10

10-28-2015 07:23 PM

Quote:

Originally Posted by Kennuck (Post 7356991)

Near as I can recall 12 on the front end. Don't forget the driveshaft.

Posted via Mobile Device

bvb69C10

10-28-2015 07:25 PM

Quote:

Originally Posted by Kennuck (Post 7356991)

Near as I can recall 12 on the front end. Don't forget the driveshaft.

Thanks. Where on the driveshaft, u joints? Do you use the same chassis grease?
Posted via Mobile Device

Kennuck

10-28-2015 07:36 PM

Re: 1969 C/10 zerk fittings

Yes u joints if they haven't been replaced with non greasable ones. You can use the same grease.

Kennuck

10-28-2015 07:43 PM

Re: 1969 C/10 zerk fittings

I recounted there are actually 18. 2 each upper control arm 2 each lower control arm 2 ball joints, tie rod end at knuckle, tie rod end on center link, pitman arm. so that 9 on one side plus another 9 on the other side.

bvb69C10

10-28-2015 08:15 PM

Quote:

Originally Posted by Kennuck (Post 7357101)

Wow, that's a bunch..Thanks again. I'll hunt them all down
Posted via Mobile Device

All times are GMT -4. The time now is 01:34 AM.