Control Arms & Misc
 

I've been reading in other sections of the forums lately and someone mentioned that the C50 and C60 sheetmetal will bolt on to the the light duty series trucks. Those fenders have fender flares both big and small and it got me thinking about building a prerunner style 63-66 GMC. I'm actually building a three link with wishbone bone for my street truck that can easily be duplicated on another truck since the GMC's all had leaf springs [all that I've found anyway].
So do you know of an off road suspension company making a crossmember kit complete with arms to raise the front end unlike the dropmember kits the bagger guys use?

I really doubt I get an answer here but its worth a shot and no I don't want a 4X4 instead.


Thanks, Dan

Re: Control Arms & Misc
 

Sounds like custom fab territory to me. would be sweet to do a long travel 60s truck.

Re: Control Arms & Misc
 

That's what I thought too, if it ends up being a build myself. I can weld with gas, arc and mig so anything can be done. Even if I could just find control arms it would help.

Re: Control Arms & Misc
 

This thread may interest you?

http://67-72chevytrucks.com/vboard/s...=63+pre+runner

Re: Control Arms & Misc
 

Fabtech use to make a 2wd lift kit,If you get lucky you might find one used but good luck on that.If you want pre runner style http://giantmotorsports.com/content/view/85/105/

Re: Control Arms & Misc
 

Thanks guys I appreciate the info!

Re: Control Arms & Misc
 

If you want a smallish lift c30 springs and you can use 88-98 lift spindles with some parts changed http://67-72chevytrucks.com/vboard/s...d.php?t=442205