The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Radiator core support (https://67-72chevytrucks.com/vboard/showthread.php?t=690698)

jturner18

12-05-2015 11:49 PM

Radiator core support

1 Attachment(s)

Alright fellas, and ladies, I need some good sound advice...My radiator support, at the bottom, looks to be held on by some rubber (worn out) cushions. The steel that attaches them are very rusted out. My question is...can I just replace said steel with a fab job, or can I purchase them without buying the whole front support, as mine appears to be in pretty good shape. Thanks for any and all help!

jturner18

12-05-2015 11:54 PM

Re: Radiator core support

1 Attachment(s)

Quote:

Originally Posted by jturner18 (Post 7400049)

This is the top of the inner fender. The little support up there is gone also.

Captainfab

12-06-2015 12:26 AM

Re: Radiator core support

If you have the skills and equipment to fabricate your patch pieces and weld them in, I say go for it. That is what I would do and have done. If you don't have the means to fabricate the patch piece, you can cut the needed piece from a donor radiator support and inner fender.

All times are GMT -4. The time now is 02:57 AM.