tubbing front & back to lay on 22s 1990 suburban
 

I wanting to get my suburban to lay out on 22s. can anyone post pics of what was all cut and relocated in the front and back. any help will be greatly appreciated.

Re: tubbing front & back to lay on 22s 1990 suburban
 

The front to lay frame you need a dropmember no inter fenders and maybe get a vintage air kit.The rear i can't say most of us don't bag a suburban but probably a lot of stuff cut out in the back also.

Re: tubbing front & back to lay on 22s 1990 suburban
 

Well im going to end up z'ing the frame front and rear, i got the fender wells already pulled out. The blower motor im not worried about at this moment but i know it has to go.

Re: tubbing front & back to lay on 22s 1990 suburban
 

Here are the only burb threads that I know of. Some have really good pics:

http://67-72chevytrucks.com/vboard/s...d.php?t=383055

http://c10forum.com/forum/showthread.php?t=14590

http://c10forum.com/forum/showthread.php?t=2592

Re: tubbing front & back to lay on 22s 1990 suburban
 

What's your current set up? Looks Killer I'm ordering parts for my 91 now

Re: tubbing front & back to lay on 22s 1990 suburban
 

You will have to trim the inner fenders up front you can go with slosh tubz or some trailer fenders an relocate the battery rear an can raise the wheel wells an make a notch cover like a truck maybe?

Re: tubbing front & back to lay on 22s 1990 suburban
 

I know what has to be done i was just hoping to get some ideas before i tackle it, ive never worked on a older suburban. My current set up is just bagged on all four corners 8" notch in the rear, 6 gallon tank, 2 viair 444 compressors, 8 smc valves . I got the front all cut out and battery relocated yesterday. Just have to cut the fender wells in the rear tomorrow. Im going to body drop it, what im most curious about is the z in the rear. Thanks for the compliments and help its greatly appreciated!