|
Windshield frame photo/details
I am trying to get a detailed photo of the outer edge on the inside of a Blazer windshield frame. I am repairing one with rust but it is rotted enough to not see the bolt holes/nut plates and their locations. I am hoping someone may have a photo and some measurements or possibly a actual size template to aid me in this repair. Any help would be greatly appreciated. Thanks
|
Re: Windshield frame photo/details
I have plates that were in the rubber seal that bolts to that area
http://67-72chevytrucks.com/vboard/s...d.php?t=659649 |
Re: Windshield frame photo/details
|
Re: Windshield frame photo/details
|
Re: Windshield frame photo/details
Do you have a measurement of the 3 holes and their spacing?
|
Re: Windshield frame photo/details
Frames are gone I can measure the plates from the other thread if you like
|
Re: Windshield frame photo/details
That would help me , Thank you
|
Re: Windshield frame photo/details
3 Attachment(s)
I took all the measurements starting at the 2 in. mark
|
Re: Windshield frame photo/details
Thanks this will help get it right.
|
| All times are GMT -4. The time now is 01:39 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com