The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Brake line question (https://67-72chevytrucks.com/vboard/showthread.php?t=693085)

OldChevy61

12-29-2015 08:34 PM

Brake line question

Headed to get lines tomorrow and seems I have misplaced one of the brass tees. The front lines are 1/4in, rear 3/16. The one I'm missing is the passenger front . Can someone confirm this is a 1/4,1/4 ,3/16 tee. Only thing I can find local is 1/4 ,3 ways. I,m sure I could use it and reduce down,but would rather not. Does anyone have an extra laying around from and upgrade. I posted in wanted but no hit yet. Looks like this.
http://i192.photobucket.com/albums/z...psev9gcvjf.jpg

Heater63

12-30-2015 12:03 AM

Re: Brake line question

try McMaster-Carr. They seem to have everything.

nsb29

12-30-2015 09:30 AM

Re: Brake line question

I have one you can have just send me your address and pay for shipping

jbgroby

12-30-2015 11:22 AM

Re: Brake line question

That's a common fitting that any NAPA should have. Bring the male fitting with you if you can to test fit.

OldChevy61

12-30-2015 12:19 PM

Re: Brake line question

Quote:

Originally Posted by jbgroby (Post 7428090)

That's a common fitting that any NAPA should have. Bring the male fitting with you if you can to test fit.

The ones I have found are not slotted so as to clip to the frame like OEM. Napa was just scratching their head.

OldChevy61

12-30-2015 12:20 PM

Re: Brake line question

Quote:

Originally Posted by nsb29 (Post 7427990)

I have one you can have just send me your address and pay for shipping

Thank you sir . will do.

oldtrux

12-30-2015 06:57 PM

Re: Brake line question

inline tube

All times are GMT -4. The time now is 06:38 AM.