The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - RV Tilt Column Re-assembly (https://67-72chevytrucks.com/vboard/showthread.php?t=693328)

chiefcfd

01-01-2016 12:37 PM

RV Tilt Column Re-assembly

4 Attachment(s)

I got started re-assembling my tilt column. It is an RV column so the only thing I had to do was move the NSS switch before powder coating.

chiefcfd

02-15-2016 08:55 PM

Re: RV Tilt Column Re-assembly

3 Attachment(s)

I got finished with my Tilt Column rebuild. I think it turned out pretty nice. Parts are hard to find. I couldn't find everything in one place.I had to make multiple orders.

Coley

02-15-2016 09:16 PM

Re: RV Tilt Column Re-assembly

Did you have to shorten the lower shaft? I thought there was a 2" difference in length or something like that?
Coley

chiefcfd

02-15-2016 09:25 PM

Re: RV Tilt Column Re-assembly

The van tilt is different length. The truck and rv tilt are the same length. The other difference is the shift tube has a bend on the end that is different.

All times are GMT -4. The time now is 11:07 PM.