Parting a 1971 1972 K20
 

Update: whole truck is going to a forum member in Iowa.













ntil further notice parts are for pickup only or delivery (if you are not too far) and I'm headed that way. I just don't have time to deal with shipping until Feb at the earliest. I have other parts trucks and parts that would make it worth a trip here. I get to eastern ND, NW Iowa, and SE MN from time to time.

Unlike most of the K20's that follow me home, this one isn't a candidate for being saved. The rear of the frame is rustier than maybe practical to repair and there is no title. The cab was replaced at some point and really isn't too bad. It does need some rocker and support repair but overall good for a Midwest cab. I am keeping the doors, (I have other doors for sale) upper radiator tube, dipstick, and auto trans to np205 adapter and coupler for my brood of K20's.

Here are some pics. Spicers stay with front axle until axle sells.

Cab $275 without doors
Hood $75
Disc brake Dana 44HD big hub Front axle $300 without spicers
Rear Bumper (slight bend and a couple surface rust spots) $80

Separate spare closed knuckle 67-69 axle with older style spicers $125

Re: Parting a 1971 1972 K20
 

more pics of cab

Re: Parting a 1971 1972 K20
 

Is the red one beside it the one you have for sale? If so is it still available?

Re: Parting a 1971 1972 K20
 

Any chance it has the Rams horn exhaust manifolds? I could use a set.

Re: Parting a 1971 1972 K20
 

Is there a deal on the D44 and Eaton rear?, also just checking but it's the smooth top roof, not a cab light roof, correct?

Re: Parting a 1971 1972 K20
 

A family member expressed some interest in it so no longer for sale, sorry.

I will look, assume you want the straight down 4x4 only style?

I would make a deal on the pair, let me check condition. Do you care what ratio? They are probably 4.10's but I will confirm. It is not a cab light cab.

Re: Parting a 1971 1972 K20
 

4:10 is as high as it gets for an Eaton I think, so that should be OK, and I'll have to check with the boss

Re: Parting a 1971 1972 K20
 

Would you sell the spicer hubs separately? And are the custom emblems staying with the doors?

Re: Parting a 1971 1972 K20
 

Yes the straight down style exhaust manifolds. Also a complete kick down linkage if an automatic.

Re: Parting a 1971 1972 K20
 

Yep, only 4.10's and 4.56's in these Eatons

Emblems I would sell separate but don't have time to deal with shipping for awhile

Sorry as stated in post 1 I don't have time to deal with shipping for awhile. I didn't see before that you were a long ways away from here.

Re: Parting a 1971 1972 K20
 

I can wait on shipping. Just need to know you have them. I can pay you for them now.

Re: Parting a 1971 1972 K20
 

I'll take your front bumper brackets if you have a picture. And there are of course 4x4 from the k20

Re: Parting a 1971 1972 K20
 

I need the gauge cluster. How much for it?

Re: Parting a 1971 1972 K20
 

Looking for the entire power steering setup. Pump, brackets,pulleys,hoses,box, steering arm. Everything to convert manual to power.

Re: Parting a 1971 1972 K20
 

I know you are busy, just wanted to let you know I have a friend 45 minutes from you to pick up parts for me. Easy transaction. Either post or PM me when you get a chance. Thanks

Re: Parting a 1971 1972 K20
 

There is a forum member here interested in the whole truck, but I will keep you in mind if he decides to pass. thanks, Jud

Re: Parting a 1971 1972 K20
 

Someone put an engine with the 2wd version in it, they seem to fit pretty good.

Re: Parting a 1971 1972 K20
 

OK thanks for checking.

Re: Parting a 1971 1972 K20
 

How lunch for the steering Wheel?

Re: Parting a 1971 1972 K20
 

Update: The whole truck is going to a forum member in Iowa.