The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Part # help please!!! (https://67-72chevytrucks.com/vboard/showthread.php?t=695707)

sameyrasmea72 01-24-2016 03:01 PM

Part # help please!!!
 
I have two NOS door seal gaskets that have part #'s on them. They are out of the box. I have no Idea which side is which. Any info would be appreciated....Jason

The part # are:

3951814
3951817

Hutch 01-24-2016 03:05 PM

Re: Part # help please!!!
 
Jason
3951817 is the Left hand
3951814 is the Right Hand

davepl 01-24-2016 03:08 PM

Re: Part # help please!!!
 
1 Attachment(s)
I'll let you read it for yourself, but the 817 I'm not sure about. Seems like if you have an 814 RH you should have a matching 813 LH, and I don't know what an 817 is. Also my book shows them under the "CLIP - RETAINER" section for some reason, not the "SEAL - ASSY" section.

too much stuff 01-24-2016 03:09 PM

Re: Part # help please!!!
 
Generally odd numbers are drivers side. Even are pass.

sameyrasmea72 01-24-2016 03:11 PM

Re: Part # help please!!!
 
Dang that was fast!!!!

sameyrasmea72 01-24-2016 03:18 PM

Re: Part # help please!!!
 
They almost look interchangeable if you just flop them around and put the corner in the correct spot.

davepl 01-24-2016 03:19 PM

Re: Part # help please!!!
 
Quote:

Originally Posted by sameyrasmea72 (Post 7459472)
They almost look interchangeable if you just flop them around and put the corner in the correct spot.

That's pretty much the only way to tell them apart, hold up the corner to the right place...

sameyrasmea72 01-24-2016 03:24 PM

Re: Part # help please!!!
 
Quote:

Originally Posted by davepl (Post 7459457)
I'll let you read it for yourself, but the 817 I'm not sure about. Seems like if you have an 814 RH you should have a matching 813 LH, and I don't know what an 817 is. Also my book shows them under the "CLIP - RETAINER" section for some reason, not the "SEAL - ASSY" section.

I looked again. It is a 13 not a 17.

Thanks for the response everyone!!

I am fixin to start putting my truck together so I am sure I will have tons of questions for y'all. I have taken apart about 50 of these truck but only put one together and that was in 1990.


All times are GMT -4. The time now is 07:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com