The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - step rail (https://67-72chevytrucks.com/vboard/showthread.php?t=695995)

I have a 1982 k20 pu with side fuel tanks. does anyone know of any side steps that would fit on these trucks. thanks

long bed or short bed?

There are no factory 3/4 ton short beds.

OK, I put a set of these (except #204040 for short bed) on my K10 RCSB a year and a half or so ago. No issues. You do want to tighten the bolts up once in a while though.

You have to drill one hole in the frame rail for each side. I used a 1/4" drill, then drilled that out with a step-drill. See installation guide on this page.

Available in nicely finished black powder coat (which I have) as well as in stainless (#204041-2).

The ones from LMC are these same items, except marked up from MSRP.

Amazon.com: Aries 204041 3" Black Side Step...

Here is how mine look. The angle is adjustable: I made mine parallel to the ground though the rear lift is an inch higher than the front.

http://users.rcn.com/weyand/smalls/IMAG0669small.jpg