The 1947 - Present Chevrolet & GMC Truck Message Board Network - Other Location Not Listed Wanted: 12 Bolt rearend (for leaf spring truck)

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - Other Wanted: 12 Bolt rearend (for leaf spring truck) (https://67-72chevytrucks.com/vboard/showthread.php?t=697088)

Russ.W.

02-06-2016 02:05 AM

Found: 12 Bolt rearend (for leaf spring truck)

Edit: Found one! Thanks folks.

1rippen6

02-06-2016 09:28 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

I have several 12 bolts out of blazers may have to move the spring pad width. I would ship through fastenal so someone would need to pick it up at the other end is that doable? If that is possible I can get you some pictures.

gpgofast

02-06-2016 12:35 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by Russ.W. (Post 7475677)

G'day folks.

Looking for a 12 Bolt rearend for a '67 C10.

Housing must have leaf spring mounts/brackets

Axles/lugs/ratio etc not important. They will be replaced unless it's a perfect combo in great condition.

A bare housing would be ideal.

Seller needs to be willing to have it shipped to my shipping agents in Kelso, Washington. 98626.

I live in Australia so I can't pick it up :D

I can only pay via PayPal, and I will absolutely need pics.

Thanks for your time.

Cheers,
Russ

I will have one out of my 1971 1/2 ton K10 4X4. In relatively good shape. Please PM me for details. PS. I live in Washington state, so I may be able to deliver for a fee.

Russ.W.

02-06-2016 09:56 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by gpgofast (Post 7475909)

I will have one out of my 1971 1/2 ton K10 4X4. In relatively good shape. Please PM me for details. PS. I live in Washington state, so I may be able to deliver for a fee.

Unfortunately, I believe 71's are a different width. I'm not interested in modifying housings (with the exception of relocating leaf mounts). Sorry.

Russ.W.

02-06-2016 09:58 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by 1rippen6 (Post 7475753)

I'm not sure that's possible but I will send them an email and check.

1rippen6

02-06-2016 10:02 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by Russ.W. (Post 7476429)

I'm not sure that's possible but I will send them an email and check.

The ones I have are out of 72 blazers if that will work.

Russ.W.

02-06-2016 10:27 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by 1rippen6 (Post 7476432)

The ones I have are out of 72 blazers if that will work.

I'm under the impression 72's are a different width. Sorry. I can't use them.

1rippen6

02-06-2016 10:28 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

No problem I can get a measurement if you know what you need

Russ.W.

02-21-2016 03:52 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Bump.

Still in desperate need of one.

HONDAWASAKI

02-21-2016 07:40 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

I have a leaf spring rear end already pulled, but I am not sure if it is a '69, or '70 it measures 58 1/4 flange to flange. Do you have measurements? I also have a '67 coil spring rear end next to it for reference, were they the same width? The coil spring housing measures 56 3/4 flange to flange. So its probably from an '70.

un4gvn!

02-21-2016 08:35 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

I have one with a flip kit if you are lowering it. 100 for just the bare housing. I also have the rest of this rear-end like the series 4 carrier with 4:10 gears, Kal-tech traction, and new shocks. I wouldn't know where to begin on shipping it.

Russ.W.

02-22-2016 09:01 PM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Thanks for the response guys. My diff measures exactly 57" from outside of flange, to outside of flange, or 56.5" from inside of flange to inside of flange.

When measuring from outside of flange: 57" (57inch / 4ft 9inch / 1448mm)

http://i33.photobucket.com/albums/d9...y.jpg~original

When measuring from inside of flange: 56 1/2" (56.5inch / 4ft 8.5inch / 1433mm)

http://i33.photobucket.com/albums/d9...y.jpg~original

richard2717

02-23-2016 12:00 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

I think I have one from my 69 GMC I will measure in the morning. Even if correct , not sure how to go about the shipping but can check on that as well

Russ.W.

02-23-2016 02:49 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by richard2717 (Post 7496135)

I think I have one from my 69 GMC I will measure in the morning. Even if correct , not sure how to go about the shipping but can check on that as well

I appreciate that. Thanks.

richard2717

02-26-2016 09:59 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

1 Attachment(s)

Russ
The rear end I have is correct but it has some heavy gouges and pitting in the axle tubes on both sides. I tried several times to get some decent pictures but they are not showing up well in the pics. I did attach the best one

.

Russ.W.

02-27-2016 02:59 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

Quote:

Originally Posted by richard2717 (Post 7500069)

Thanks Richard. Unfortunately I will have to pass. That doesn't look a whole lot better than the one I already have. Surface rust is fine, but pitting I need to keep away from.

I appreciate the effort though. Thank you.

Sklptrljay

02-27-2016 04:04 AM

Re: Wanted: 12 Bolt rearend (for leaf spring truck)

1 Attachment(s)

Attachment 1503476Give this guy a call.

All times are GMT -4. The time now is 11:55 PM.