The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Turn signal lever (https://67-72chevytrucks.com/vboard/showthread.php?t=698075)

chiefcfd

02-15-2016 07:33 PM

Turn signal lever

Does anybody know the correct screw size for the turn signal lever for a tilt column? I have a new switch and lever but the screw didn't come with either one.

davem815

02-15-2016 09:04 PM

Re: Turn signal lever

2 Attachment(s)

I had my non-tilt apart. I didn"t see you were looking for a tilt until after I took pictures. I don't know if they are the same. Measure about .164, so #8 x 1/2" long

chiefcfd

02-15-2016 09:15 PM

Re: Turn signal lever

That sounds about right. Thanks.

All times are GMT -4. The time now is 02:35 PM.