![]() |
Parking brake using Lokar cables
My '64 only has the parking brake handle (under dash) with the cable that goes through floorboard, nothing else. Would I be able to buy this:
![]() Thoughts? Thanks! |
Re: Parking brake using Lokar cables
I am not positive about the Lokar, but you are going to need the cable braces if you plan to do the 66 & newer e brake cables. For the 65 there is a cross member you need for the cables. I don't have access to my photos where I am at now, but hopefully some one else can chime in/show you what you need besides the cables.
|
Re: Parking brake using Lokar cables
Quote:
|
Re: Parking brake using Lokar cables
|
Re: Parking brake using Lokar cables
Start here:
http://67-72chevytrucks.com/vboard/s...50&postcount=8 Then use your Lokar set up like this: http://67-72chevytrucks.com/vboard/s...46&postcount=4 To the rear trailing arms: http://67-72chevytrucks.com/vboard/s...2&postcount=17 |
Re: Parking brake using Lokar cables
I think I have it all figured with the last two posts! Now to spend some money.
|
All times are GMT -4. The time now is 01:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com