The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Static drop header questions. (https://67-72chevytrucks.com/vboard/showthread.php?t=699480)

Schlem69lwb

03-01-2016 12:08 PM

Static drop header questions.

Looking for some help guys. I've got a 69LWB with 3.5/5 drop and I'm about ready to drop in my new 350 but i need headers. Anyone have suggestions on headers for this application??

DUD2STUD

03-02-2016 04:48 PM

Re: Static drop header questions.

I have a 72 LWB with approximately the same drop. These are what I am running. http://www.summitracing.com/parts/hed-69090. They fit was perfect with no problems.

drewbert41

03-02-2016 05:15 PM

Re: Static drop header questions.

Do they hang below frame? Just not bottom out?

Schlem69lwb

03-03-2016 08:54 AM

Re: Static drop header questions.

From all the reading I've done on this. I've gathered that car long tubes are shorter. They say same era Chevelle headers hit and hang just to the bottom of frame rail.

All times are GMT -4. The time now is 10:16 AM.