The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 72 tilt column b/u light connection (https://67-72chevytrucks.com/vboard/showthread.php?t=700760)

65chevysub

03-12-2016 08:04 PM

72 tilt column b/u light connection

2 Attachment(s)

Hi everybody. I have a 72 tilt column in my 65 Suburban, and I want to hook my aftermarket backup lights to the nsw but there are no open terminals on the switch to hook to. Can someone help me with this? Thanks

SS Tim

03-12-2016 08:45 PM

Re: 72 tilt column b/u light connection

Did you look at a schematic? They are in the FSM.
The Dark Green (75) is the feed from the fuse block and the Light Green (24) is the switched output to the locally grounded lamps.

chiefcfd

03-12-2016 09:06 PM

Re: 72 tilt column b/u light connection

Is that a manual NSS? If so just change it out with an auto switch and be good to go.

65chevysub

03-12-2016 09:45 PM

Re: 72 tilt column b/u light connection

I believe it's an auto nss. I had the column put in about 17 years ago. My backup lights are units I bought at Autozone and are run off of a rocker switch on the dash.

hdff	03-14-2016 05:27 PM

Re: 72 tilt column b/u light connection

Quote:

Originally Posted by SS Tim (Post 7520062)

Did you look at a schematic? They are in the FSM.
The Dark Green (75) is the feed from the fuse block and the Light Green (24) is the switched output to the locally grounded lamps.

I agree with Tim, the greens are what you use

All times are GMT -4. The time now is 05:45 AM.