Amber Parking Lights, not the bulb but the lense cover
 

Does anyone know where I can get amber parking lights for an 86 C10? Not the bulb but the actual lense cover. I want the parking light behind the grill, in the bumper and on the side of the fender to all have an amber lense cover so it is amber even when the lights are not illuminated.

So far I can only find the side markers in amber.

Not my truck although the lamp setup is identical.
http://67-72chevytrucks.com/vboard/a...1&d=1453682189

Re: Amber Parking Lights, not the bulb but the lense cover
 

Could try painting them or see if a local plastic shop can make you new lenses for it.

Re: Amber Parking Lights, not the bulb but the lense cover
 

Thanks. I'll just look into tinting them amber. Not sure if there's even a plastic shop local to me. Didn't know there were even shops that would do that so I'm not sure where to even begin looking.

Re: Amber Parking Lights, not the bulb but the lense cover
 

Hey, that's my truck:metal:.

To the best of my knowledge, the parking lens does not come in Amber. On mine, I just used Amber bulbs in the clear lens lights, the ones in the bumper & the parking lights behind the grill.

Re: Amber Parking Lights, not the bulb but the lense cover
 

You can paint them using either Tamiya clear orange (TS-73) . A few coats of that will get you close. You can also get it from Model master and Testors. Just sand it with high grit paper to give it some tooth. Then clean with alcohol and remove residue. A couple of coats later. Looks just like new. Good luck.

Re: Amber Parking Lights, not the bulb but the lense cover
 

Yeah you have built a pretty sweet ride. Hopefully mine will get there before too long.

http://imagizer.imageshack.us/v2/640...923/nQHTtp.jpg

Thanks for the help though. I'll just look into painting with an amber tinted spray paint.

Re: Amber Parking Lights, not the bulb but the lense cover
 

I'll give this a shot with my old ones and see how it turns out. Thank you!

Re: Amber Parking Lights, not the bulb but the lense cover
 

Thanks for the kind words and good luck with your build. Post pics of the lights, I like to see how they turn out.