1966 K10 Hubs Questions
 

Hey all still working on my 1966 K10 stepside, Goldie.
Working on the front differential and I have a couple of questions.
I have not been able to find a good parts breakdown of the stock hubs, so wondering if any body might have a good parts break down of the hub itself.
I also have different parts on the drivers side as opposed to the passenger side. So I was hoping maybe someone might have an extra set of hubs and or parts.
Thanks for any help

Re: 1966 K10 Hubs Questions
 

post a pic of the other one

Re: 1966 K10 Hubs Questions
 

https://lh3.googleusercontent.com/-k...324_094949.jpg

https://lh3.googleusercontent.com/-K...2/IMAG0003.JPG

https://lh3.googleusercontent.com/-C...2/IMAG0004.JPG

https://lh3.googleusercontent.com/-S...2/IMAG0005.JPG

https://lh3.googleusercontent.com/-g...2/IMAG0006.JPG

https://lh3.googleusercontent.com/-L...2/IMAG0007.JPG

Re: 1966 K10 Hubs Questions
 

Thanks all for the responses.
Both hubs are the same. It is the internal parts that are different. One side has the spring and a partial spring washer the other has no spring and what looks like what maybe the spring washer.
The parts breakdown maybe os use to see what is missing.
Still would be cool if I could find someone with a complete set of hubs that they don't need.
Thanks again for the info guys.

Re: 1966 K10 Hubs Questions
 

pimpston65 would be the guy to talk to, he's been through it.

Re: 1966 K10 Hubs Questions
 

I would be the guy, I was looking at the post today. the parts are very similar. the 3/4ton flange is the only difference being larger in diameter. I have both 1/2ton and 3/4ton. I was going to have the flange cut down on a lathe before I found my 1/2ton NOS pair.

Re: 1966 K10 Hubs Questions
 

When these die, what specifically dies on them? I've read and heard of lots of people who have to replace their hubs--what do they need to replace?

I've got an original set on my '62 K10, but haven't taken them apart (and won't for a while), and I've got a Dana 44 that was put under a '59 GMC, and it has Ford logo blue locking hubs.

-Brad

Re: 1966 K10 Hubs Questions
 

by looking at mine apart, id say the 4 springs that get compressed and released when the selector knob is employed would fail first. second the knob itself from people using hand tools to turn the knob to engage cuz with tight fitment if your not dead on lined up its a no go. the last part to fail would be the locking halves themselves, they are hardened but if you roll the truck to engage insted of turning the knob they rub each other until they engage which will cause wear.