|
Steering Help
Can anyone post a pic of their pitman arm and idler arm from the front of the truck? I replaced my stock steering with Unisteer rack and pinion...hated it...now I am replacing everything with Moog parts and an AGR steering gearbox. I had all these parts off and taken apart. Now that I am putting them back on I am having some binding up issues. Any steering pics from tie rods to the link would be helpful. Thanks Garrett
|
Re: Steering Help
5 Attachment(s)
this is off a 1968 3 door with disc brakes the top pics are from my 1971 1/2 ton truck hope this works there are stock set up's
|
Re: Steering Help
4 Attachment(s)
number 2 pics
|
Re: Steering Help
Thank you SO MUCH! It's exactly what I needed.
|
Re: Steering Help
3 Attachment(s)
1971 1/2 ton truck top View
|
Re: Steering Help
was not sure what you needed but all i can do is try have fun motor on
|
Re: Steering Help
Perfect. Thanks for all the help. These are exactly what I needed!
|
Re: Steering Help
Thanks again for the pictures. I have my new AGR steering gearbox installed and new Moog parts i.e. tie rods, pitman arm, and idler arm replaced. It drives amazing. I highly recommend AGR, they were great to work with!
|
Re: Steering Help
I am considering the unisteer system. What was it you didn't like? Thanks
|
| All times are GMT -4. The time now is 01:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com