The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Tool to remove wiper arms (https://67-72chevytrucks.com/vboard/showthread.php?t=704324)

cgster 04-16-2016 11:15 AM

Tool to remove wiper arms
 
1 Attachment(s)
Is this the correct tool to remove the windshield wiper arms on a 68 C10? Thanks.

truckster 04-16-2016 12:13 PM

Re: Tool to remove wiper arms
 
Yes, that's it. It just takes the tension off the post.

davepl 04-16-2016 01:51 PM

Re: Tool to remove wiper arms
 
When I took the wiper arms off my '70 I didn't know what I was doing and I pulled out two little small clips that seemed important for retaining the arms, then was able to get the arms off pretty easily.

But when I put them back on, it sure didn't seem like they needed any help! I then went to new reproductions in stainless that didn't have separate clips that I could see.

So, inquiring minds need to know - are there clips that get removed? Every arm I've pulled since I just rotate a little to get the head in line with the shaft and it pops right off with a little help. But I'm pretty sure I'm not doing it right.


All times are GMT -4. The time now is 10:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com