The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Transmission Crossmembers Collect Them All! (https://67-72chevytrucks.com/vboard/showthread.php?t=704921)

Gregski 04-21-2016 09:59 PM

Transmission Crossmembers Collect Them All!
 
remember growing up when those silly action figure commercial would come on and they would show you like 17 of the same thing and at the end say "Collect Them All"

well that's how I am feeling lately hunting for transmission crossmembers while trying to wrap up my manual Overdrive Transmission swap on my beloved '74

but enuff about me lets take a look at the many flavors of Square Body transmission cross members (by the way is it "crossmember" one word, or "cross member" two words?)

Gregski 04-21-2016 10:07 PM

Re: Transmission Crossmembers Collect Them All! - 1973 C20
 
5 Attachment(s)
our generation starts in 1973 so it's only appropriate that our first candidates are from 1973

first let me start off by saying I know nothing about automatic transmission, I mean I know there's the 400, 350, 200, and the 700 and I think I already said too much

I mean I don't even know how to drive an automatic (that's a joke)

so check out this beauty a yellow(ish) 1973 Chayenne Super 20 (now correct me if I is wrong, but the C20 means 3/4 ton, correct? if so just keep that in the back of your head as we bring up the another truck from 1976 later on)

so this one had the transmission crossmember mounted to the bottom frame rail, we will call this crossmember a low rise as you will see later on there is one that is a bit taller (aka the high rise)

Note: this truck was an automatic, but the transmission was already gone, so we don't know what kind it had

so where am I going with this, my point is coming so just keep a readin'

Gregski 04-21-2016 10:20 PM

Re: Transmission Crossmembers Collect Them All! - 1974 C10
 
4 Attachment(s)
so here's a look at my old setup, this is a 1974 manual 4 speed the Muncie SM465

this one has a top mounted transmission crossmember

Gregski 04-21-2016 10:24 PM

Re: Transmission Crossmembers Collect Them All! - 1976 C20
 
5 Attachment(s)
ok this is where I got confused, how come this C20 aka 3/4 ton truck, also an automatic like the one from 1973 has a different transmission crossmember

yes it is still bottom mounted, however it sits about two inches higher than the one from 1973, I call it the high rise style

can you help me identify this transmission, this truck had this trans in it

Gregski 04-21-2016 10:26 PM

Re: Transmission Crossmembers Collect Them All!
 
5 Attachment(s)
more / better pics of that 1976 transmission

anything on it screams TH400 or TH350?

Edit: just found this Identify My Transmission page, pretty cool, I am leaning on calling it the TH400, ha ha

slotard 04-21-2016 11:49 PM

Re: Transmission Crossmembers Collect Them All!
 
Looking at the specs on GM Heritage Center there were all sorts of different dimensions for the frame over the years too.

MountainGoat1966 04-22-2016 12:03 AM

Re: Transmission Crossmembers Collect Them All!
 
Keep in mind besides the various transmissions used, there were half tons, 3/4 tons, 1 tons, 2 wheel and 4 wheel drive variations, short and long wheelbase too.
That brings the possible combinations up to about a million different ones used.

Titomars 04-23-2016 10:47 AM

Re: Transmission Crossmembers Collect Them All!
 
Quote:

Originally Posted by Gregski (Post 7569006)
more / better pics of that 1976 transmission

anything on it screams TH400 or TH350?

Edit: just found this Identify My Transmission page, pretty cool, I am leaning on calling it the TH400, ha ha

That is a TH 400

the cross member from it should work nicely for your 833

Gregski 04-23-2016 11:22 AM

Re: Transmission Crossmembers Collect Them All!
 
Quote:

Originally Posted by Titomars (Post 7570481)
That is a TH 400

the cross member from it should work nicely for your 833

Thanks bud, but my money is on the TH350 crossmember, we shall find out here shortly as that is my task for this Saturday morning, gentlemen place your bets!

Gregski 04-23-2016 11:30 AM

Re: Transmission Crossmembers Collect Them All!
 
4 Attachment(s)
ok, so this is yet another transmission crosssmember that I have, I believe this one came off of a mid 80s automatic 4X4

This one was also mounted on the bottom frame rail

so here it is in the original dirty condition as I pulled it off the donor truck, and then squeaky clean, and ready for paint

Gregski 04-23-2016 11:33 AM

Re: Transmission Crossmembers Collect Them All! - 1985 C10
 
3 Attachment(s)
and then I saw this one, now this one may be the whackiest of them all, I did not get this one, I sorta forgot to pull it at the Pick n Pull and I sorta didn't want it, ha ha (also it didn't look too safe to pull it - and I didn't wanna get dead)

looks like it is also an automatic crossmember here it is shown on a 1985 C10 doing what can only be described in [ahem] motorcycle terms as a "Stoppie" LOL

Gregski 04-23-2016 11:37 AM

Re: Transmission Crossmembers Collect Them All!
 
1 Attachment(s)
this pic of a 1987 crossmember I borrowed from our brothers at 73-87ChevyTrucks.com should be the same as the 1985 automatic above but I just wanted to show you this beauty off the truck

69heavychevy 04-23-2016 05:49 PM

Re: Transmission Crossmembers Collect Them All!
 
Those first two auto x-members you posted are actually the same. The first one is just missing the outer support brackets. I have only ever seen 4 different style trans x-members on these trucks.
73-79 auto, 80-87 auto, 73-79 4x4, 73+?? manual, don't quote me on it though....
Keith Seymore would probably know for sure...

wilkin250r 04-23-2016 06:14 PM

Re: Transmission Crossmembers Collect Them All!
 
I'm just speculating, but that last goofy one you posted looks to have only one exhaust pipe headed back, I wonder if that's for the Inline 6.

Gregski 04-23-2016 11:02 PM

Re: Transmission Crossmembers Collect Them All!
 
5 Attachment(s)
Quote:

Originally Posted by 69heavychevy (Post 7570783)
Those first two auto x-members you posted are actually the same. The first one is just missing the outer support brackets. I have only ever seen 4 different style trans x-members on these trucks.
73-79 auto, 80-87 auto, 73-79 4x4, 73+?? manual, don't quote me on it though....
Keith Seymore would probably know for sure...

one is twice as tall as the other, the lower one came off of a TH350 truck the taller one came off of a truck with a TH400

hrere are some better comparison pics

D13 04-24-2016 07:06 AM

Re: Transmission Crossmembers Collect Them All!
 
Trucks with catalytic converters had 'single hump' cross members. The lead pipes tied together and ran into the single converter, which was hung off a bracket at the cross member. Thus need for pipe clearance was one side only.
There seems to have been a change in the 4x4 cross members at some point, the height of the trans to t-case adapters changed.

MikeB 04-24-2016 11:15 AM

Re: Transmission Crossmembers Collect Them All! - 1974 C10
 
Quote:

Originally Posted by Gregski (Post 7569000)
so here's a look at my old setup, this is a 1974 manual 4 speed the Muncie SM465

this one has a top mounted transmission crossmember
http://67-72chevytrucks.com/vboard/a...1&d=1461291557

A question: My 82 C10 has a crossmember that's high on the drivers side for exhaust pipe clearance, but low on the passenger side. Will a crossmember like the one above fit my truck for more exhaust clearance on the passenger side? Transmission is a TH350.

Gregski 04-24-2016 01:03 PM

Re: Transmission Crossmembers Collect Them All! - 1974 C10
 
Quote:

Originally Posted by MikeB (Post 7571452)
A question: My 82 C10 has a crossmember that's high on the drivers side for exhaust pipe clearance, but low on the passenger side. Will a crossmember like the one above fit my truck for more exhaust clearance on the passenger side? Transmission is a TH350.

I would lean towards saying yes, with the caveat that you may need to drill some new holes in it or elongate a couple, but as far as transmission position it does sit at the same height as your current cross member

but I don't know if there was a big difference in frame design between the 73-80 trucks and the 81-87 trucks so maybe someone else can comment, I always stress that they should have been broken up into two separate eras/generations but no one is listening, ha ha, jk


All times are GMT -4. The time now is 05:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com