Letting all my good stuff go
 

Sold my 72 K10 Cheyenne Super. This is all the stuff I had saved up for it over the years. Time to let it all go.

Q-jet Carb in NOS packaging. Clearly really low miles by how clean it is. Came with my truck, but I never ran it. #17054929 on the side. SOLD.
http://s19.postimg.org/4atje3unn/IMG_1145.jpg
http://s19.postimg.org/qb9vuqdbn/IMG_1146.jpg
http://s19.postimg.org/lqnpfstmb/IMG_1148.jpg

1967-72 2-speed wiper motor. Unsure of condition. Had it as a spare. $20. Will ship
http://s19.postimg.org/wntmib5rn/IMG_1152.jpg

1967-72 bedside toolbox door. Some rust in lower corner and several broken mounting screws. Fixable. Comes with lock tumbler, spring clip, and part of latch assembly.SOLD
http://s19.postimg.org/j86lsux9v/IMG_1153.jpg
http://s19.postimg.org/530sr1o8j/IMG_1154.jpg
http://s19.postimg.org/ggnc28yr7/IMG_1155.jpg

Hubcap wheel stainless 4x4 hubcaps for 15-inch wheels. Driver condition. Fronts have a few dings, rears are pretty clean. NOT cut. No splits. SOLD
http://s19.postimg.org/nxwjhgoab/IMG_1157.jpg
http://s19.postimg.org/5wdejnu9f/IMG_1161.jpg
http://s19.postimg.org/ica4denlf/IMG_1164.jpg

4x4 Rally wheel caps and rings for 15-inch wheels. Really clean rings w/ no dents. Caps are weathered but not pitted. One mounting screw missing. SOLD.
http://s19.postimg.org/ety4h0mpf/IMG_1166.jpg

4x4 Rally wheels. 15x8. True and straight, currently painted (mostly) orange. One has some rust around bead, but it never leaked. $80 Prefer local pickup (Portland, OR) because they're so heavy.
http://s19.postimg.org/vx5hq9ss3/IMG_1168.jpg
http://s19.postimg.org/62vp0hss3/IMG_1169.jpg

New to selling here, but I get that the first "I'll take it" is the deal. PayPal OK, but bear with me as I navigate it and shipping costs. Desired shipping methods and costs will be up to the buyer.

:chevy:

Re: Letting all my good stuff go
 

Does the tool box come from a 71? Key?
I'm interested in the whole lot but I am looking for a tool box lock with an "A" keyway.

Re: Letting all my good stuff go
 

Oops - pass on the carb. I thought it was NOS.

Craig

Re: Letting all my good stuff go
 

That's a good question. The truck was a ’72, but the cab was earlier. Not sure about the pickup bed or this toolbox door. I found another that was rust-free and used it.

The lock came from that replacement door. I don't have a key for it, and I'm unsure of the year. Can get more pics if you'd like.

Jim

Re: Letting all my good stuff go
 

So did I! Came with the truck when I bought it originally. Other than being really clean and tight, I don't know much about it. Didn't want to crack it open until I needed it.

Re: Letting all my good stuff go
 

Does the cylinder have a 4 digit code stamped into it on the side?

Re: Letting all my good stuff go
 

Does not appear to have any numbers stamped on it.

Re: Letting all my good stuff go
 

Ok do you have any extra keys laying around? In the pictures I posted you can see the letter A stamped into the key just below the key head. You have one with the letter A see if you can slide it into the keyway. It may not turn the lock which is ok as long as it slides all the way into it.

Re: Letting all my good stuff go
 

Got it. I don't have any A keys around here, but I might have some at work. I'll check to see and let you know.

Re: Letting all my good stuff go
 

I'll take the rally trim rings and caps as long as the rings are 2 1/2" wide with 16 clips on the back of each.

Thanks
Jim

Re: Letting all my good stuff go
 

Ok well if the lock takes an "A" keyway I will take these parts.

Re: Letting all my good stuff go
 

Would you sell the rally trim rings separately? If so, how much shipped to 87107? Thanks, Pete

Re: Letting all my good stuff go
 

Could not find any A keys, but I did confirm that both C and D don't fit. I'll keep looking.

Re: Letting all my good stuff go
 

Hey Jim, they're 3 inches wide and have a single-piece retainer ring. See pics:

http://s19.postimg.org/ydl39cf03/IMG_4163.jpg
http://s19.postimg.org/j69p2qcj7/IMG_4164.jpg

Re: Letting all my good stuff go
 

Thanks, but I'd rather sell them as as set.

Re: Letting all my good stuff go
 

If the rims fit 16" 8 lug steelies ill take those and the toolbox door as is.

Re: Letting all my good stuff go
 

ok, didnt read that the hubs are for 15" wheels earlier, now i know. ill take the toolbox door if still available.

Re: Letting all my good stuff go
 

I'm only looking for 2.5" so I'll pass on the rally trim rings and caps.

-Jim

Re: Letting all my good stuff go
 

How much do you want for the beauty ring set shipped to 90201 wished I still lives in Woodburn and not california I would have picked them up

Re: Letting all my good stuff go
 

I'd like to get in line for the hub caps, if still available.

thank you,
chad

Re: Letting all my good stuff go
 

I'll get in line for the tool box door if still available.

Re: Letting all my good stuff go
 

Just a quick update -- I don't have any A keys, but I'm going to swing by a locksmith today to see if they've got some. chewychevy67 is first on the door until we know for sure what tumbler is with it.

Re: Letting all my good stuff go
 

I'd really like to sell the set complete, so $100. Shipping via UPS appears to be about $30.

Re: Letting all my good stuff go
 

Looks like you're first on the caps. PM me your info and I'll work out shipping.

Re: Letting all my good stuff go
 

It's NOT an A key. Just verifying that you're no longer interested before I move on.