The 1947 - Present Chevrolet & GMC Truck Message Board Network - MN Parting out: 68 chevy custom 1/2 ton

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MN Parting out: 68 chevy custom 1/2 ton (https://67-72chevytrucks.com/vboard/showthread.php?t=706952)

Parting out: 68 chevy custom 1/2 ton

This thing is in poor shape. There are no body panels worth saving. I will only be shipping about every third day so if you need parts in a hurry, this may not be it. None of these parts are new, or like new. No shipping on large or heavy items, Shipping is extra.

$650 as it sits.

The choke cable with knob, Radio, and heater controls with cables are spoken for.

15" split rims, $50 for all 4
Door panels will clean up ok I think, not sure if the screws will come out nicely. $75 with the arm rests.
Glove box door with hinge and knob. $15
Ash tray assembly. $15
Gauges look decent. $50
4 speed trans. $75
292, turns over. $500
Headlight bezels. (one screw pulled through)$35
Hood letters. $30
Power mirrors, working condition unknown. $100
Steering wheel fair shape. $60
Column looks ok. $100

Ask about anything else.

Re: Parting out: 68 chevy custom 1/2 ton

More pics.
This will probably be off to scrap within 2 weeks...

Re: Parting out: 68 chevy custom 1/2 ton

Is that gas cap dented? Hard to tell in the picture, I might be interested in that.

Re: Parting out: 68 chevy custom 1/2 ton

Quote:

Originally Posted by Chevy Fan Always (Post 7592079)

Is that gas cap dented? Hard to tell in the picture, I might be interested in that.

Yes it has some dents in it.

Re: Parting out: 68 chevy custom 1/2 ton

Interested in the stainless windshield trim. What condition is it in? Price shipped to 28027 ?

Thanks, Steve

Re: Parting out: 68 chevy custom 1/2 ton

How much for radio to 96020 California?

Re: Parting out: 68 chevy custom 1/2 ton

Interested in those stainless grill hoops, can you see what shape they are in? Its hard to tell from picture.

Re: Parting out: 68 chevy custom 1/2 ton

how much for the hood latch shipped to 21037?

Re: Parting out: 68 chevy custom 1/2 ton

I will check the parts asked about tomorrow.

I know the grill hoops had a few light dings.

Re: Parting out: 68 chevy custom 1/2 ton

is there a center seat belt pair?

Re: Parting out: 68 chevy custom 1/2 ton

Condition of interior rear view mirror, gas pedal, shifter knob ? Pricing shipped to 92020 Thanks

Re: Parting out: 68 chevy custom 1/2 ton

I'll take the ash tray assy pending close up pictures of front, shipping 92020

Re: Parting out: 68 chevy custom 1/2 ton

How much for the dash? Is it in good condition? No cracks? May be some pic's please? How much would it be to ship to 08857? Thanks, NGN Son.

Re: Parting out: 68 chevy custom 1/2 ton

Shift lever to 21771? How are those headlight doors? I'll have to check which side, but I have one good (no dings) side and only need the other side to be the same.

That thing had a sexy mirror upgrade! 2016 has nothing on those...back in their day.

Re: Parting out: 68 chevy custom 1/2 ton

Close up pic of dash pad and steering wheel.. And the sleeve on the steering column where the shifter lever would mount if your willing to part out.

Re: Parting out: 68 chevy custom 1/2 ton

Is the taillight trim a 67/8? Looks like a 69-72. Pending pictures I'd be interested if they're for a 68, and if you can remove them and the clips....I swear you need to be an engineer to remove them. Shipping to 99208.

Thanks!

Joe

Re: Parting out: 68 chevy custom 1/2 ton

Quote:

Originally Posted by Steve Cole (Post 7592111)

Interested in the stainless windshield trim. What condition is it in? Price shipped to 28027 ?
Confirmed that it does have a couple of dings in it. I have not had any luck shipping these pieces in the past due to size.

Quote:

Originally Posted by Dustytrix (Post 7592453)

Interested in those stainless grill hoops, can you see what shape they are in? Its hard to tell from picture.

Overall would be good drivers. A couple of light scuffs and dings and typical road wear from years of use. $70 plus shipping

Quote:

Originally Posted by chainsawman (Post 7592482)

how much for the hood latch shipped to 21037?

Hood latch works fine, will need painting. $35 shipped for what is in the pic.

Quote:

Originally Posted by 68bowtie (Post 7592556)

is there a center seat belt pair?

Nope, sorry.

Quote:

Originally Posted by Silver68 (Post 7592623)

Condition of interior rear view mirror, gas pedal, shifter knob ? Pricing shipped to 92020 Thanks

Rear view is not correct, don't recall the gas pedal condition. Shifter knob is $18 shipped as pictured.

Quote:

Originally Posted by Silver68 (Post 7592625)

I'll take the ash tray assy pending close up pictures of front, shipping 92020

Works good, should clean up. $30 shipped.

Quote:

Originally Posted by NGN (Post 7592683)

How much for the dash? Is it in good condition? No cracks? May be some pic's please? How much would it be to ship to 08857? Thanks, NGN Son.

The dash is coming loose and will need to investigate more when I get in that far. The ends are curling some.

Quote:

Originally Posted by special-K (Post 7592711)

Tim, bezels will be decent, but each one has a little ding and pass side has the lower 2 screws pulled through. Check out the pics.

Quote:

Originally Posted by BIG ORANGE (Post 7592789)

Close up pic of dash pad and steering wheel.. And the sleeve on the steering column where the shifter lever would mount if your willing to part out.

Waiting on the dash pad to verify condition. Added steering wheel pics. Not planning on taking the column apart as of now.

Quote:

Originally Posted by jaybatta (Post 7592820)

No 68 tail light trim on this one. I have never had luck removing them anyhow...

Re: Parting out: 68 chevy custom 1/2 ton

hows that hood moulding?

Re: Parting out: 68 chevy custom 1/2 ton

I'm gonna pass on the st. wheel but wanna see pic's of the dash pad, need it for a build I'm doing on the cheap.
thanks
Donnie

Re: Parting out: 68 chevy custom 1/2 ton

I'll pass on ashtray, looking for less corrosion Thanks

Re: Parting out: 68 chevy custom 1/2 ton

Quote:

Originally Posted by michael bustamante (Post 7592931)

hows that hood moulding?

Couple of dents in it.

Quote:

Originally Posted by BIG ORANGE (Post 7592969)

I'm gonna pass on the st. wheel but wanna see pic's of the dash pad, need it for a build I'm doing on the cheap.
thanks
Donnie

If it warms up I will check it out better. As I say, I think it is loose from the backing.

Quote:

Originally Posted by 1968k20 (Post 7593031)

Radio?

I am not sure what it is exactly so I posted it as spoken for in the first post.

Quote:

Originally Posted by Silver68 (Post 7593046)

I'll pass on ashtray, looking for less corrosion Thanks

No problem.

Re: Parting out: 68 chevy custom 1/2 ton

Price on trans, shifter and pedal assembly shipped to 30145 and would it fit v8? Need cables of clutch pedal too