![]() |
Project Sloppy Jo.....
4 Attachment(s)
Why Sloppy Jo,
Cause it is a hot mess....... My 72 Blazer has seen better days, but I am going to tear it down, fix all these high speed patches and make it a 4.8/4L60E/NP205...... Lots of sloppy work, hence the name..... I will do it all myself to include painting. Smitty |
Re: Project Sloppy Jo.....
3 Attachment(s)
Look,
Rust....... |
Re: Project Sloppy Jo.....
I'll start cutting it out this week and getting the correct patch panels ordered.....
Smitty |
Re: Project Sloppy Jo.....
1 Attachment(s)
This shroud has seen better days.......
Smitty |
Re: Project Sloppy Jo.....
Congrats on the new project!
Keep us posted with pictures and progress. |
Re: Project Sloppy Jo.....
Good luck on the project ! Just wondering why you'll be using a 4.8 and not a 5.3? I assume you already have a donor truck?
|
Re: Project Sloppy Jo.....
Quote:
Thoughts? Smitty |
Re: Project Sloppy Jo.....
Quote:
http://www.superchevy.com/how-to/eng...e-ls-slugfest/ |
Re: Project Sloppy Jo.....
Quote:
I have read that article. I am not looking for big HP numbers, just a reliable engine that is efficient. Have you had bad experience with the 4.8? Smitty |
Re: Project Sloppy Jo.....
Quote:
|
Re: Project Sloppy Jo.....
Quote:
I am doing the body work now, will get into the drivetrain soon. Smitty |
Re: Project Sloppy Jo.....
Quote:
The best advice I can give you if you're doing a swap, is buy a complete running vehicle. You'll be shocked at how many small parts you'll need/use off of the donor vehicle. Buying just the engine, trans and computer from a wrecker IMHO is not the way to go. |
Re: Project Sloppy Jo.....
Thanks Hemi,
I dont have that luxury here in the Vista. I have to drive all over the place to find what I need. I am looking though.... Smitty Quote:
|
Re: Project Sloppy Jo.....
5 Attachment(s)
These may qualify for expedient patches of the year. Must have been on one of those flip it fast shows......Sad.....
Smitty |
Re: Project Sloppy Jo.....
4 Attachment(s)
More "how not to repair floors" madness.....Found this on one frame horn.....The other one looks ok so far.....
Smitty |
Re: Project Sloppy Jo.....
2 Attachment(s)
It was a good parts day for SJ, picked up all the transfer parts off a 90 Burb and got a set of near new camaro manifolds with cats.......
Good day indeed....... Smitty |
Re: Project Sloppy Jo.....
Hey Smitty,
Nice project. The hulk build in my signature. I am running the 4.8/4L60E with a NP241. since it is in a 4x4 I put a nice little Comp cam in it and changed the valve springs other than that its all stock. I am on board with your build.... Good luck! Scott |
Re: Project Sloppy Jo.....
Im interested in seeing how the 4l60 and 241 go together - from what I have read so far some go together with no adapter and some require an adapter (I believe from a 700r4).
|
Re: Project Sloppy Jo.....
2 Attachment(s)
goes together great!!!:metal:
|
Re: Project Sloppy Jo.....
Quote:
|
Re: Project Sloppy Jo.....
motor/trans out of a 2008 truck and np241 transfer case out of a 1991 burb.
|
Re: Project Sloppy Jo.....
3 Attachment(s)
Good parts day for SJ. Picked up a Ram seat for the front and mutt seat for the back, luckily it fits. Picked up some parts of a wrecked 06 4.8, wanted to get the airbox, but it was a victim of the crash :( .....Oh well, still was a good day.
Smitty |
Re: Project Sloppy Jo.....
nice project..subscribed:metal:
|
Re: Project Sloppy Jo.....
Got a parts list of what ill need before i junk the donor blazer? hemi43
|
Re: Project Sloppy Jo.....
Quote:
Smitty |
All times are GMT -4. The time now is 04:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com