The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Vin on frame (https://67-72chevytrucks.com/vboard/showthread.php?t=707622)

CG 05-20-2016 10:23 PM

Vin on frame
 
I know this has been asked and answered a dozen times, cant remember and cant find it.

I know Chevy has the numbers on the frame, for some reason I have in my head GMC did not put numbers on the frame ... yes, no?

Z10 05-20-2016 10:25 PM

Re: Vin on frame
 
My 72 GMC has at least one on the frame.

:gmc2:

CG 05-20-2016 10:26 PM

Re: Vin on frame
 
Ok cool, I dunno where I thought I had heard that. Im getting a 2 wheel drive short bed frame from a buddy and he says he doesn't see any numbers on the frame. Probably under gunk =)

Z10 05-20-2016 11:11 PM

Re: Vin on frame
 
Mine was on top of the frame near the steering box.:gmc2:

Steven R 05-20-2016 11:18 PM

Re: Vin on frame
 
Same for mine
gmc 71
Right on top behind steering box

57taskforce 05-20-2016 11:24 PM

Re: Vin on frame
 
Quote:

Originally Posted by CG (Post 7599818)
Ok cool, I dunno where I thought I had heard that. Im getting a 2 wheel drive short bed frame from a buddy and he says he doesn't see any numbers on the frame. Probably under gunk =)

I'm pretty sure the earlier production (67-68) gmcs were hit and miss. I know there are plenty of examples on here of those same early trucks not having spids either.

midniteblues 05-21-2016 01:52 PM

Re: Vin on frame
 
if its a bare frame you should be able to find the #'s on top of the driverside frame rail between the cab mounts.

or the one on top of the driverside frame rail between the steering box and motor mount.

my 67 and a bare 71 frame i have have #'s in both these locations.

Livrat 05-21-2016 01:55 PM

Re: Vin on frame
 
The only ones I have seen over the years that did not have a vin on the frame were 67/68 GMC's

Trevor 05-21-2016 05:21 PM

Re: Vin on frame
 
My 71 GMC has two; one by steering box, one roughly centered between cab mounts (drivers side).

GASoline71 05-21-2016 07:42 PM

Re: Vin on frame
 
My 1972 GMC C15 has the VIN number on the top of the frame near the power steering box. The 1969 Chevy C10 frame I have has it in the exact same place.

Gary

chewychevy67 05-21-2016 09:42 PM

Re: Vin on frame
 
My 67 gmc had no Vin stamps and no spid.

poway 05-22-2016 02:39 PM

Re: Vin on frame
 
I have a 1968 GMC short bed fenderside. I found numbers stamped upside down on the driver’s side frame rail that do not even begin to translate into anything close to the VIN on the driver’s side.
3914401-311
9-18-114
Does anyone have any info on the frame numbers?

poway 05-22-2016 03:02 PM

Re: Vin on frame
 
That last post should have read:
I have a 1968 GMC short bed fenderside. I found numbers stamped upside down on the driver’s side frame rail that do not even begin to translate into anything close to the VIN on the driver’s side door jamb.
3914401-311
9-18-114
Does anyone have any info on the frame numbers?


All times are GMT -4. The time now is 05:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com