The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - Return line fitting (https://67-72chevytrucks.com/vboard/showthread.php?t=707870)

gpat@earthlink.net

05-23-2016 07:05 PM

Return line fitting

My fuel sending unit has a 12 0r 13 mm male end on the return
line. Trying to go with 4 AN braided line . anybody got an idea for a fitting , found a 6AN to 14 mm for the fuel line . no luck on return line yet . Ideas ????

First c10

05-23-2016 11:21 PM

Re: Return line fitting

A little background or pictures will help us help you.....

gpat@earthlink.net

05-24-2016 12:20 AM

Quote:

Originally Posted by First c10 (Post 7603100)

A little background or pictures will help us help you.....

LQ9 4l80 np205 into a 72 Blazer. Finishing up the frame.now. Blasted, powder coated. Motor and trans installed. New 31 gallon tank with 381 pump and sending unit. need to get fuel to engine. Front and rear end installed. Rear disc brake upgrade. Never posted a picture. Will try to figure that out.
Posted via Mobile Device

First c10

05-24-2016 12:39 AM

Re: Return line fitting

1 Attachment(s)

Does it have this sending unit? 31 gallon tank from a later model blazer 88+ tbi tank.

First c10

05-24-2016 01:21 AM

Re: Return line fitting

1 Attachment(s)

This is with the internal pump installed and -6 an lines connected.

All times are GMT -4. The time now is 08:35 AM.