The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Quick question (https://67-72chevytrucks.com/vboard/showthread.php?t=708100)

AustinBelair

05-25-2016 11:45 PM

Quick question

If I have brand new 73-87 upper and lower control arm assemblies and have brand new new Moog 60-66 ball joints, can I swap the 60-66 ball joints over to the new 73-87 arms?

The Spindles I have require 60-66 ball joints and tie rods.

AustinBelair

05-28-2016 11:23 PM

Re: Quick question

Anyone help?

69gmcc10

05-28-2016 11:49 PM

Re: Quick question

Yes, the differences on the ball joints is the pitch of the shaft. The diameter of the ball joint housing that bolts in or presses into the control arm are the same

AustinBelair

05-28-2016 11:52 PM

Re: Quick question

Awesome, thanks very much

All times are GMT -4. The time now is 10:44 PM.