The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 292 Flywheel Question (https://67-72chevytrucks.com/vboard/showthread.php?t=710008)

scoot_mcgrute

06-16-2016 03:21 PM

292 Flywheel Question

My 292 was originally in an automatic truck and I'm working on putting a T5 behind it right now. When I pulled the flexplate off, I noticed that there was a spacer, roughly 1/8", between the crank and the flexplate. I did not reinstall it with the flywheel.

Do I need to run that spacer between the flywheel and the crank or was that for the flexplate only?

Wrenchbender Ret

06-16-2016 03:52 PM

Re: 292 Flywheel Question

Ive removed & installed many flywheels on 292 engines & the smaller 6 cyl. engines & never had a spacer in there.

All times are GMT -4. The time now is 10:05 PM.