How are you mounting the slave Cly for hyd clutch
 

I'm running a LS1 and T56 six speed. Where are you guys mounting the slave cylinder for the clutch. Pics would be greatly appreciated

Thanks
Steve

Re: How are you mounting the slave Cly for hyd clutch
 

Here is how I mounted the one on my son's truck. This is a 5.3/T-56 set up.

Re: How are you mounting the slave Cly for hyd clutch
 

The master looks great, any pic of the slave on the bell housing, or are you using a Hyd. throw out bearing?

Re: How are you mounting the slave Cly for hyd clutch
 

Hyd throw out bearing.

Edit: my bad, I just noticed you are asking for slave cyl mounting pics.

Re: How are you mounting the slave Cly for hyd clutch
 

I believe everyone uses the stock arrangement of hydro throwout bearing for the T56 clutch slave.

Re: How are you mounting the slave Cly for hyd clutch
 

I'm not sure how you would do a fork with outside slave setup on a t-56 as there are no provisions for a fork pivot etc. I'm sure it could be done but not sure why you would.

Re: How are you mounting the slave Cly for hyd clutch
 

Exactly what I wanted to see. What year mak and model is that one off of
Thanks
Steve