The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA WTB Adapter For NP205 to Th400 (https://67-72chevytrucks.com/vboard/showthread.php?t=712079)

4x41971SWB 07-11-2016 10:02 PM
WTB Adapter For NP205 to Th400
 
Let me Know what you have, condition, pictures, Price with shipping & PP.
Thanks

special-K 07-12-2016 08:48 AM
Re: WTB Adapter For NP205 to Th400
 
You might consider posting in the 73-87 parts board, as these transfer cases use a different bolt pattern than the ones that mount the TH400. TH400s never came in these trucks, but did in the area I suggested you look.

praisegeetarman 07-12-2016 10:10 AM
Re: WTB Adapter For NP205 to Th400
 
Not mine, but I saw this.

http://salem.craigslist.org/pts/5639551288.html

4x41971SWB 07-12-2016 12:01 PM
Re: WTB Adapter For NP205 to Th400
 
Quote:
Originally Posted by praisegeetarman (Post 7650610)
Thanks,
I`ll check it out.

A1971Blazer 07-12-2016 01:30 PM
Re: WTB Adapter For NP205 to Th400
 
Quote:
Originally Posted by 4x41971SWB (Post 7650274)
Let me Know what you have, condition, pictures, Price with shipping & PP.
Thanks
Do you need the "figure 8" on the NP205 side? I may have one.....

dennis7222 07-12-2016 03:55 PM
Re: WTB Adapter For NP205 to Th400
 
If he does'nt want it, please let me know, I'm looking for one too! Thanks, Dennis 765-522-7222

4x41971SWB 07-12-2016 06:23 PM
Re: WTB Adapter For NP205 to Th400
 
2 Attachment(s)
Quote:
Originally Posted by A1971Blazer (Post 7650834)
Do you need the "figure 8" on the NP205 side? I may have one.....
Yes Figure 8

A1971Blazer 07-12-2016 07:21 PM
Re: WTB Adapter For NP205 to Th400
 
2 Attachment(s)
OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good

Old seal is still installed in it (needs replaced)

Attachment 1552004

That's some leftover silicone around the holes

Attachment 1552005

Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C.....

I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad.

AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues....

I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00...

SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway...

Let me know....thanks!

4x41971SWB 07-12-2016 08:49 PM
Re: WTB Adapter For NP205 to Th400
 
Quote:
Originally Posted by A1971Blazer (Post 7651128)
OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good

Old seal is still installed in it (needs replaced)

Attachment 1552004

That's some leftover silicone around the holes

Attachment 1552005

Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C.....

I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad.

AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues....

I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00...

SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway...

Let me know....thanks!
I`ll Take it as long as its as you describe with all bolt threads in good condition.
Thanks

4x41971SWB 07-12-2016 08:52 PM
Re: WTB Adapter For NP205 to Th400
 
PM sent

4x41971SWB 07-12-2016 08:59 PM
Re: WTB Adapter For NP205 to Th400
 
Quote:
Originally Posted by A1971Blazer (Post 7651128)
OK.......I found it......in very good shape....I bead blasted it a little to get the surface rust off....threads are good

Old seal is still installed in it (needs replaced)

Attachment 1552004

That's some leftover silicone around the holes

Attachment 1552005

Here's the deal..........I was originally going to adapt a 4L60E to my NP205, when I tore the 205 down to rebuild it.....it had several parts that were going to need replaced....so I abandoned it and opted for a 241C.....

I was really hungry for an adapter and I paid way too much for this one.....but......that's water under the bridge......my bad.

AA sells the same adapter for around $260.....it's a reproduction and I'm sure it's a very good quality...I have used their stuff quite a bit....never had any issues....

I looked up your zip (guessed) 92025...? UPS ground ship would be $35.00...

SO....after all that long winded BS.....I will take $250 and I will pay the shipping and PP fees.....at this point I don't have a use for it anyway...

Let me know....thanks!
PM sent

A1971Blazer 07-12-2016 09:23 PM
Re: WTB Adapter For NP205 to Th400
 
Quote:
Originally Posted by 4x41971SWB (Post 7651220)
I`ll Take it as long as its as you describe with all bolt threads in good condition.
Thanks
Threads guaranteed to be good.....I will blast it clean all over, run a tap thru the threads to clean them out, and zinc chromate primer it for you......will reply to your PM......thanks...enjoy!

4x41971SWB 07-12-2016 10:00 PM
Re: WTB Adapter For NP205 to Th400
 
Quote:
Originally Posted by A1971Blazer (Post 7651262)
Threads guaranteed to be good.....I will blast it clean all over, run a tap thru the threads to clean them out, and zinc chromate primer it for you......will reply to your PM......thanks...enjoy!
Payment sent.
Thanks
Chris


All times are GMT -4. The time now is 10:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com