The 1947 - Present Chevrolet & GMC Truck Message Board Network - anybody else using the dropped trans crossmember from Brothers or ECE?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - anybody else using the dropped trans crossmember from Brothers or ECE? (https://67-72chevytrucks.com/vboard/showthread.php?t=71287)

superchevy

10-03-2003 05:01 PM

anybody else using the dropped trans crossmember from Brothers or ECE?

If so, did you have to use a spacer under the trans mount?
I'm asking because it looks to me that my engine is "tilted" to far back with the dropped crossmember - it's angled back too much. If were to run a 1" spacer under the trans mount, it looks like it would make the engine more level.
I'll see if I can take some pics to show what I'm talking about.
SC

Slammed67

10-03-2003 05:09 PM

Will the trans hit the trans tunnel on the cab if you raise it up??

lost wages

10-04-2003 02:03 AM

level the frame and check your drive line angles, if there on i wouldnt worry about how it looked.

All times are GMT -4. The time now is 01:29 PM.