![]() |
1962 Chevy C10 Glove Box Reassemble
4 Attachment(s)
Alright guys, I'm drawing a major brain fart. I ordered a new glove box insert and am ready to put it back in. I can get the insert in, but I can't figure out for the life of me how the door goes back on. I feel like it is really easy and I am just missing something. What am I doing wrong???
|
Re: 1962 Chevy C10 Glove Box Reassemble
There is a bracket that you are missing. It goes around the cardboard glove box and attaches to the door.
|
Re: 1962 Chevy C10 Glove Box Reassemble
1 Attachment(s)
Quote:
|
Re: 1962 Chevy C10 Glove Box Reassemble
That pic from the LMC catalog doesn't really show it too clearly.
I've got one on a glove box door I just picked up if yours is totally MIA. $15 plus the ride. -Brad |
Re: 1962 Chevy C10 Glove Box Reassemble
The frame is not shown in that exploded view. I do not think that piece is available from the aftermarket. Was the frame not there previously?
|
Re: 1962 Chevy C10 Glove Box Reassemble
Quote:
|
Re: 1962 Chevy C10 Glove Box Reassemble
Quote:
|
Re: 1962 Chevy C10 Glove Box Reassemble
Tester,
Are you sure that's not a GMC door? Here's a picture of the '61 glove box installation: http://www.secondchancegarage.com/ar...3/apache-g.jpg |
Re: 1962 Chevy C10 Glove Box Reassemble
Quote:
|
Re: 1962 Chevy C10 Glove Box Reassemble
1 Attachment(s)
Not the best pic, but you can see the frame installed here.
You can see where the glovebox insert fits into the frame, the three tabs hold it in place. |
Re: 1962 Chevy C10 Glove Box Reassemble
Quote:
|
Re: 1962 Chevy C10 Glove Box Reassemble
when you get it, it has been my experience on removal, and install, to leave the bracket and door attached to the glove box, and then remove/install the entire unit.
|
All times are GMT -4. The time now is 04:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com