The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Intake to Booster Hose (https://67-72chevytrucks.com/vboard/showthread.php?t=718745)

1bad396ss 09-26-2016 11:13 PM

Intake to Booster Hose
 
What hose (part number or size) is required to run from the truck intake 2003 4.8L to the vacuum booster (CPP)?

Is there a specific hose that fits nicely or will a generic size be required?

I don't have the factory hose of the donor vehicle.

Nodnarb76 10-04-2016 11:57 AM

Re: Intake to Booster Hose
 
When I was doing my swap (LQ4 into 87 Suburban) My nipple on the motor was a little different in size than the nipple on my brake booster. I had to get two pieces of hose and a brass barbed adapter from Home Depot to make it work.
I'm sorry I can't remember what size the hoses or the adapter was.

SBTork 10-17-2016 10:46 PM

Re: Intake to Booster Hose
 
I can't remember the part number but I called a local chevy dealer and had them order me the correct part for an '06 Silverado with a V8. Worked perfectly on my '85 Suburban with a 5.3 from an '05 Avalanche. Also had them order me the correct nipple too, I think it was less than $30 for both pieces. Worth the money and way better looking than piecing something together IMO

72MARIO 10-18-2016 08:00 AM

Re: Intake to Booster Hose
 
I had the same problem. Ended up using 2002 gmc Yukon Denali hose and fitting. The 2003 Z71 4x4 was to small


All times are GMT -4. The time now is 05:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com