The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Is the crate 260hp enough ? (https://67-72chevytrucks.com/vboard/showthread.php?t=720626)

dirish 10-20-2016 12:41 PM

Is the crate 260hp enough ?
 
I have read and read but..... who has the 260hp in a 4x4 blazer. All stock. Plan on keeping manifolds insted of headers.
opinions on a daily driver crate 350, looking at the 260hp. But..... is it enough? I don't need to race people I just want reliability and power to go the speed limit.
330hp is nice but don't want to go electric fuel pump.
Thank you in advance.

orange72blazer 10-20-2016 01:28 PM

Re: Is the crate 260hp enough ?
 
Quote:

Originally Posted by dirish (Post 7747479)
I have read and read but..... who has the 260hp in a 4x4 blazer. All stock. Plan on keeping manifolds insted of headers.
opinions on a daily driver crate 350, looking at the 260hp. But..... is it enough? I don't need to race people I just want reliability and power to go the speed limit.
330hp is nice but don't want to go electric fuel pump.
Thank you in advance.

I have one in my Blazer but I pulled the heads & replaced them with some rebuilt vortec heads & replaced the cam with the Comp Cams XE268H. I did this when the engine was new so I have no idea how it ran stock but it runs awesome set up like I have it.

72gmguy 10-20-2016 01:43 PM

Re: Is the crate 260hp enough ?
 
I'm sure the 260 horse motor has more power than any stock motor that ever came in a first gen blazer. They rated hp differently back then. Plus everything I've read recently about those motors is that they respond well to mods and are very durable. I just read an article not too long ago and I think they put a turbo charger one with low boost and it survived a bunch of dyno runs unscathed.

dirish 10-20-2016 01:49 PM

Re: Is the crate 260hp enough ?
 
Quote:

Originally Posted by 72gmguy (Post 7747522)
I'm sure the 260 horse motor has more power than any stock motor that ever came in a first gen blazer. They rated hp differently back then. Plus everything I've read recently about those motors is that they respond well to mods and are very durable. I just read an article not too long ago and I think they put a turbo charger one with low boost and it survived a bunch of dyno runs unscathed.

Mine has a week original 350. I'm thinking anything would be better. Is the l31 vortex motor a simple drop in? I need a new intake, anything else?
Thanks!!

starterman99 10-20-2016 02:17 PM

Re: Is the crate 260hp enough ?
 
The L31 does not have fuel pump mounted on block so you would need electric fuel pump. also has one piece rear main oil seal so you would have to replace flywheel.

hemi43 10-20-2016 05:32 PM

Re: Is the crate 260hp enough ?
 
The 5.3 swaps that everyone is doing are only rated at just 300HP, and thats more than enough power. I guess it all depends on what you plan on doing with the truck. If you put an overdrive transmission behind that 260HP engine and 4.10 gears you'll be more than happy, IMHO.

bigdogz 10-20-2016 07:42 PM

Re: Is the crate 260hp enough ?
 
1 Attachment(s)
Its plenty of power. I put it in mine and love it... I have a 4" lift and run 35s. I have headers on mine. If I had it to do over I would put the same motor in it.

dirish 10-20-2016 08:32 PM

Re: Is the crate 260hp enough ?
 
Quote:

Originally Posted by bigdogz (Post 7747792)
Its plenty of power. I put it in mine and love it... I have a 4" lift and run 35s. I have headers on mine. If I had it to do over I would put the same motor in it.

Thanks, is that a th350? I believe I'm gonna order jegs kit .

bigdogz 10-20-2016 09:42 PM

Re: Is the crate 260hp enough ?
 
Thats where mine came from. I bought the kit with carb.,distributor,intake. Little over 2k.

dirish 10-21-2016 03:39 PM

Re: Is the crate 260hp enough ?
 
Just found this, looks like the bet for my needs.
Karlperformanceparts.com part number 10067353K3
Complete, any thoughts. I'm no mechanic so I'm trying to keep it simple.

BB72CHEVKT 10-21-2016 05:38 PM

Re: Is the crate 260hp enough ?
 
Quote:

Originally Posted by dirish (Post 7748459)
Just found this, looks like the bet for my needs.
Karlperformanceparts.com part number 10067353K3
Complete, any thoughts. I'm no mechanic so I'm trying to keep it simple.

That is just he GM crate engine 10067353 with a gasket set.

dirish 10-21-2016 06:00 PM

Re: Is the crate 260hp enough ?
 
Quote:

Originally Posted by BB72CHEVKT (Post 7748526)
That is just he GM crate engine 10067353 with a gasket set.

K3 kit comes carb to pan, water pump, starter.


All times are GMT -4. The time now is 05:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com