The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - How to measure for steering column? (https://67-72chevytrucks.com/vboard/showthread.php?t=721743)

joesscamaro

11-03-2016 06:45 PM

How to measure for steering column?

I'm looking for some guidance on how to properly measure for what length steering column I need. I'm going to be be using my stock bench seat. I'm looking for a tilt column but plan to retain the dash ignition. I'm about 6'4" so leg room is going to be a concern and would like a column that will perch as close to the dash as possible. Anyone have any column recommendations or tips on how to measure for a shorter column?

Advanced Design

11-03-2016 08:45 PM

Re: How to measure for steering column?

Ididit has good information to measure for a column...http://www.ididitinc.com/pdf/HowToMe...ringColumn.pdf

joesscamaro

11-05-2016 04:49 PM

Re: How to measure for steering column?

Ok, I'll check that link out. Thanks for the guidance

All times are GMT -4. The time now is 06:53 AM.