The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   Air ride without steering and bed modifications? (1980 C15) (https://67-72chevytrucks.com/vboard/showthread.php?t=721797)

evan 11-04-2016 05:09 PM

Air ride without steering and bed modifications? (1980 C15)
 
1 Attachment(s)
I'm planning a new project with a friend on a 1980 GMC C15 and we're thinking about using air ride. Neither of us has used it before. Our goals are to improve handling, cruise at a ride height similar to a 4/6 or 5/7 static drop and then park as low as possible without steering & bed mods. Is it still worth it to spend the money on air if we're going to leave the steering and bed stock?

I see the Ridetech level 1 kit reuses the factory control arms so I'm assuming it's not necessary to modify the steering. Does the rear four link in that kit require bed modifications? Are there other options we should consider?

Thanks for reading.

bbbc10 11-04-2016 10:06 PM

Re: Air ride without steering and bed modifications? (1980 C15)
 
Ur gonna have to do steering shaft mods an no bed mods have to be made wth that bolt in notch.....i would search the forum for morr info before buying

evan 11-04-2016 10:10 PM

Re: Air ride without steering and bed modifications? (1980 C15)
 
Quote:

Originally Posted by bbbc10 (Post 7760684)
Ur gonna have to do steering shaft mods an no bed mods have to be made wth that bolt in notch.....i would search the forum for morr info before buying

Thanks for the reply. I did a better job searching after I posted but couldn't figure out how to delete this.

I haven't found anything about having to do steering shaft mods though. I thought they were only necessary when you replace the crossmember. I'll do some more searching about that.

tinydb84 11-04-2016 10:47 PM

Re: Air ride without steering and bed modifications? (1980 C15)
 
I had that kit in my brother's truck. No steering mods. No bed cutting. Didn't get very low though. It rode great. Not worth the price though. You can get a similar kit from board vendors for a much cheaper price.

evan 11-04-2016 11:09 PM

Re: Air ride without steering and bed modifications? (1980 C15)
 
Quote:

Originally Posted by tinydb84 (Post 7760714)
I had that kit in my brother's truck. No steering mods. No bed cutting. Didn't get very low though. It rode great. Not worth the price though. You can get a similar kit from board vendors for a much cheaper price.

Which vendors are you thinking of? I checked the suspension marketplace but there's no vendor list and about a dozen posts from 2016.

tinydb84 11-05-2016 12:14 AM

Re: Air ride without steering and bed modifications? (1980 C15)
 
Travis at AZ Properformance will put together a good package for you. AVS doesn't advertise here anymore but will do the same.

andrewmp6 11-05-2016 03:10 AM

Re: Air ride without steering and bed modifications? (1980 C15)
 
This is that kit installed http://67-72chevytrucks.com/vboard/s...d.php?t=344982

andrewmp6 11-05-2016 03:13 AM

Re: Air ride without steering and bed modifications? (1980 C15)
 
And like said Travis at http://www.azproperformance.com/home.php he is a vendor on here,You can call or email him he might have some kinda discount if you tell him your a member on here.If not still worth buying off him,He carries a lot of parts and kits knows then well and i never heard a single bad thing about him.

Pro Performance 11-08-2016 11:08 PM

Re: Air ride without steering and bed modifications? (1980 C15)
 
Quote:

Originally Posted by evan (Post 7760493)
I'm planning a new project with a friend on a 1980 GMC C15 and we're thinking about using air ride. Neither of us has used it before. Our goals are to improve handling, cruise at a ride height similar to a 4/6 or 5/7 static drop and then park as low as possible without steering & bed mods. Is it still worth it to spend the money on air if we're going to leave the steering and bed stock?

I see the Ridetech level 1 kit reuses the factory control arms so I'm assuming it's not necessary to modify the steering. Does the rear four link in that kit require bed modifications? Are there other options we should consider?

Thanks for reading.

As mentioned above, no steering mods with this kit. RideTech does make a nice product, but are other options out there. Be glad to help in any way.

Travis
480-420-8175
travis@azproperformance.com

Quote:

Originally Posted by andrewmp6 (Post 7760809)
And like said Travis at http://www.azproperformance.com/home.php he is a vendor on here,You can call or email him he might have some kinda discount if you tell him your a member on here.If not still worth buying off him,He carries a lot of parts and kits knows then well and i never heard a single bad thing about him.

Thanks and appreciate it.


All times are GMT -4. The time now is 05:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com