The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   1974 gmc (https://67-72chevytrucks.com/vboard/showthread.php?t=723485)

tinker12797 11-27-2016 06:41 PM

1974 gmc
 
ok Boys and Girls I have a few blond questions If someone would indulge me please and thank you...

1974 GMC
Can you put a camper on any 1974 GMC or does it have to be a camper special??

If you only have a vin # would the vin tell you if it's a Sierra

Besides the DMV.. I tried them all ready .they dislike me their and car fax doesn't go back further than 1980
Where else could one find any information on a vehicle with only the vin# like owner of the vehicle. Ect.

Warrens69GMC 11-27-2016 07:19 PM

Re: 1974 gmc
 
Do you see the SPID in the glove box? what is the emblem above the glove box?

Gmc.guy 11-27-2016 09:29 PM

Re: 1974 gmc
 
My trucks are Canadian so they may be different but all the trucks I have had from 73 to about 84 have the spid on the inner fender under the master cylinder. It does not say too much about the gvwr You should have a tag inside the door jamb that shows your weight rating as manufactured. I'll post a pic here right away of my 74 gmc. Yours may be different.

Gmc.guy 11-27-2016 09:32 PM

Re: 1974 gmc
 
1 Attachment(s)
These are in the driver side door jamb

Gmc.guy 11-27-2016 09:34 PM

Re: 1974 gmc
 
1 Attachment(s)
Vin plate

Keith Seymore 11-27-2016 09:36 PM

Re: 1974 gmc
 
Quote:

Originally Posted by tinker12797 (Post 7780398)

1974 GMC
Can you put a camper on any 1974 GMC or does it have to be a camper special??

Sure. Just don't overdo it.

Quote:

Originally Posted by tinker12797 (Post 7780398)
If you only have a vin # would the vin tell you if it's a Sierra

No. There is no coding in the VIN for trim level.


Quote:

Originally Posted by tinker12797 (Post 7780398)
Where else could one find any information on a vehicle with only the vin# like owner of the vehicle. Ect.

For vehicles manufactured in Canada, or made in the US for Canadian consumption, you can contact GM of Canada and they can provide you with the build content for your specific vehicle.

http://www.vintagevehicleservices.com/options.html

Information for US only vehicles through the GM Heritage Center is available for 1976 and later.

http://www.gmmediaarchive.com/?page=1

You will probably not be able to track down previous owners by the VIN due to privacy laws unless you hire a private investigator.

K

Gmc.guy 11-27-2016 09:39 PM

Re: 1974 gmc
 
Is your truck a 3/4 ton or 1/2 ton? Longbed fleet side should fit almost any truck camper but it's the spring capacity that tells you if the truck will carry it safely or not. The model designation likely will not matter,

Gmc.guy 11-27-2016 09:41 PM

Re: 1974 gmc
 
Quote:

Originally Posted by Keith Seymore (Post 7780634)
Sure. Just don't overdo it.



No. There is no coding in the VIN for trim level.




For vehicles manufactured in Canada, or made in the US for Canadian consumption, you can contact GM of Canada and they can provide you with the build content for your specific vehicle.

http://www.vintagevehicleservices.com/options.html

Information for US only vehicles through the GM Heritage Center is available for 1976 and later.


http://www.gmmediaarchive.com/?page=1
K


Cool. I didn't know that


All times are GMT -4. The time now is 08:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com