The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   F/S 2-69 swb frame (https://67-72chevytrucks.com/vboard/showthread.php?t=72399)

matt67350 10-11-2003 10:41 PM

F/S 2-69 swb frame
 
Both are swb rolling frames and have no title.
Not sure on the gears. $200.00 ea.
Must be picked up in North Texas.

Inthuwind 10-11-2003 11:05 PM

bodies on frames? and if so, what condition?

matt67350 10-11-2003 11:10 PM

Frames only, if you want a cab also add $50.00
The frames are good for replacement frame or project.

Inthuwind 10-11-2003 11:16 PM

have other pics on these items?

matt67350 10-11-2003 11:24 PM

Will post tomorrow

smonty 10-12-2003 04:38 PM

reply
 
Hello Matthew,

I still want to trade the air cab I showed you for one of your frames if you decide you want to trade. I will drop off the cab and pick up the frame. Just let me know.

Ernie
smonty46@hotmail.com

matt67350 10-12-2003 08:48 PM

Yes, I have yours held back.

Inthuwind 10-12-2003 08:49 PM

did you get any pics of those cabs I was asking about?

matt67350 10-12-2003 09:21 PM

need your e-mail

krazy_texan 10-12-2003 09:48 PM

so are you saying you will sell a swb frame for 200 and for an extra 50 i could get a cab with it
if that is the case i am interested plus do you have titles on the cabs and where at in fort worth are you

matt67350 10-12-2003 10:54 PM

Guys, It's just the frame, the cab is reeeaaaalllyyyy rusty.
So the frame is the only thing that is worth having.
Not sure on the gears in the rear end. manual steering
No title. just for parts.

Inthuwind 10-12-2003 11:14 PM

ok~~thanks

matt67350 10-12-2003 11:28 PM

One is sold.
Still have a swb rolling frame.

krazy_texan 10-13-2003 12:16 AM

i dont care how rusty the cab is, let me get back to you

matt67350 10-13-2003 03:39 AM

frame
 
pic 1

matt67350 10-13-2003 03:41 AM

frame
 
pic 2
Motor mounts and auto trans cross member are sold.

matt67350 10-13-2003 07:16 PM

Ok guys, sold one and traded the other. Still have a 67 frame.
The frame shown is a 67 and is bent in the front. have a bare 67 frame to go with it that is straight. Two for one $200.00. No title

smonty 10-13-2003 07:32 PM

Reply
 
Thanks Matthew,

I will be over next week to trade the cab for the frame. Will get with you before then to see what day is the best.

Ernie
smonty46@hotmail.com


All times are GMT -4. The time now is 02:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com