The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   NV Buddy bucket(Drivers side)spacers/thick washers (https://67-72chevytrucks.com/vboard/showthread.php?t=725675)

Chevy4Life 12-25-2016 02:26 PM
Buddy bucket(Drivers side)spacers/thick washers
 
1 Attachment(s)
Buddy bucket(Drivers side)spacers/thick washers $25.00 Shipped MERRY CHRISTMAS!

1971 GMC Jimmy 2wd 12-25-2016 03:39 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
In line. Where do these go? From the seat to the bracket or the seat frame?

Chevy4Life 12-25-2016 03:43 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by 1971 GMC Jimmy 2wd (Post 7805115)
In line. Where do these go? From the seat to the bracket or the seat frame?
I don't remember off hand. I know it also levels out the drivers seat with the passengers side bracket height though.

1971 GMC Jimmy 2wd 12-25-2016 04:07 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
I will check on my buddy buckets and see if I need them. Thanks

402GMC 12-25-2016 04:45 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Put me in line

Cheyenne1970 12-25-2016 06:04 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Put me in line as well.

1971 GMC Jimmy 2wd 12-25-2016 08:32 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
I'll take them. Sending you a pm

Chevy4Life 12-25-2016 08:43 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by 1971 GMC Jimmy 2wd (Post 7805215)
I'll take them. Sending you a pm
PM returned...I think they go between the seat and slider.

1971 GMC Jimmy 2wd 12-25-2016 09:46 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
I will pass

Chevy4Life 12-25-2016 09:53 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by 402GMC (Post 7805137)
Put me in line
You are up. 71 jimmy checked and has them already.

Chevy4Life 01-01-2017 09:40 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
ttt

Eagle9502 01-01-2017 10:16 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Anyone confirm where these go?

Chevy4Life 01-01-2017 10:42 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by Eagle9502 (Post 7811890)
Anyone confirm where these go?
I keep going back and forth in my head. There is a small lip on the frame that may need the clearance for the track to slide smooth. I'll go look at my other set right now.

Chevy4Life 01-01-2017 10:55 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by Chevy4Life (Post 7811936)
I keep going back and forth in my head. There is a small lip on the frame that may need the clearance for the track to slide smooth. I'll go look at my other set right now.
OK, That was zero help. My seats were redone in the 90's and like usual they are not right after they were taken apart. I have 2 by the door UNDER the frame(below the slider) and a few washers stacked UNDER the inner frame(below the slider). I KNOW this is incorrect.

So until I find out for sure I have 2 shipped for $12.50

402GMC 01-02-2017 12:30 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
I'm I still up for all four?

Chevy4Life 01-02-2017 12:41 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by 402GMC (Post 7812053)
I'm I still up for all four?
Well you did reply before my revelation. So sure.

69RDMo 01-02-2017 01:29 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
1 Attachment(s)
they go on the outside track, between the track and the seat frame, its because the way the frame is welded, if you look on the right side of the buddy seat, the inside track sits on top of the tube, and the outside track sits on the bracket. the slide hits the flat end of the tube thats welded to the bracket. i don't know that you'd need all four but i could be wrong. my seat was missing them. hope this helps. edit looks like you figured it out:metal:

Chevy4Life 01-02-2017 01:33 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by 69RDMo (Post 7812087)
they go on the outside track, between the track and the seat frame, its because the way the frame is welded, if you look on the right side of the buddy seat, the inside track sits on top of the tube, and the outside track sits on the bracket. the slide hits the flat end of the tube thats welded to the bracket. i don't know that you'd need all four but i could be wrong. my seat was missing them. hope this helps. edit looks like you figured it out:metal:
Yes. That's the lip I was talking about, the way the tube is flattened at the ends. Thanks for your help!

Also, I tried sliding my seat forward and it didn't move like it is.

Nice frame. Love the cup holders.

Chevy4Life 01-25-2017 09:36 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Never heard back from 402GMC so TTT

davestrucks 01-25-2017 10:46 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
I can do $20.00 shipped.

Chevy4Life 01-25-2017 10:55 AM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
Quote:
Originally Posted by davestrucks (Post 7837638)
I can do $20.00 shipped.
Sure PM sent.

davestrucks 01-25-2017 09:17 PM
Re: Buddy bucket(Drivers side)spacers/thick washers
 
payment sent.


All times are GMT -4. The time now is 01:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com