Propostioning valve wire
 

Well I ended up repairing my old Propostioning valve wire. After taking a look at at work. I found that some of the wires by the connector were broken off. I took it apart and soldered a new Brown wire to the connector since I could not put on a new connector since I don't where to purchase of one. I think it came out pretty good. Thanks to all who tried to help me.

Ramiro

Re: Propostioning valve wire
 

-
That should work, and it looks good. There isn't much pressure on it. I think I would put a wire tie on it to one of the brake lines just to keep it from moving around....

LockDoc

Re: Propostioning valve wire
 

You can ground that wire with the key on and the brake warning light in the dash should illuminate. It normally comes on when starting the engine also.